LM5141-Synchronous-Buck-Converter

farhad-ekramitalab·LM5141-Synchronous-Buck-Converter·KiCad/Synchronous Buck Converter.kicad_pcb

LM5141-Synchronous-Buck-Converter PCB layout, top view — open source board by farhad-ekramitalab

About the LM5141-Synchronous-Buck-Converter PCB

LM5141-Synchronous-Buck-Converter is an open source PCB design by farhad-ekramitalab, published on GitHub. It is a 4-layer board measuring 80 × 60 mm, with 32 components from 25 distinct parts.

Other key parts include the LM5141QRGERQ1. By type, the board carries 13 capacitors, 12 resistors, 2 transistors, 2 connectors, 1 IC and 1 diode.

It belongs with the power & battery and test & measurement designs in this gallery.

From the project

12V to 3.3V 5A synchronous buck converter using TI LM5141-Q1. Complete design flow including LTspice simulation, control-loop design, KiCad schematic, PCB layout, and hardware validation.

Design and implementation of a 12 V to 3.3 V, 5 A synchronous buck converter using the Texas Instruments LM5141-Q1 peak-current-mode controller.

This project covers the complete development flow:

- Power-stage design - LTspice simulation - Control-loop design - Compensation design - KiCad schematic capture - 4-layer PCB layout - Manufacturing preparation - Hardware validation (in progress)

LM5141-Synchronous-Buck-Converter, from the project README
From the project README

Main components on the LM5141-Synchronous-Buck-Converter

LM5141QRGERQ1

LM5141-Synchronous-Buck-Converter bill of materials (BOM)

32 components, 25 distinct parts.

QtyPartRefs
1
LM5141QRGERQ1
U1
1
CSD17308Q3
Q1
1
CSD17577Q3A
Q2
1
VIN_IN
J1
1
VOUT_OUT
J2
1
PMEG4050EP
D1
1
IHLP4040DZERR56M01
L1
1
47uF
C1
1
10uF
C2
2
100nF
C3, C9
1
100nF
C5
1
470nF
C6
1
DNP
C7
1
47nF
C8
1
22nF
C10
1
180pF
C11
2
22uF
C12, C13
1
2.2uF
C14
5
0
R1, R3, R6, R11, R12
1
DNP
R2
Show 5 more
QtyPartRefs
1
100k
R4
1
10k
R5
1
2.55k
R7
2
2.2
R8, R10
1
10m
R9

LM5141-Synchronous-Buck-Converter design files

The KiCad project lives in the farhad-ekramitalab/LM5141-Synchronous-Buck-Converter repository on GitHub; these links point at the commit this page was built from.

LM5141-Synchronous-Buck-Converter: common questions

How big is the LM5141-Synchronous-Buck-Converter PCB?

The LM5141-Synchronous-Buck-Converter measures 80 × 60 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the LM5141-Synchronous-Buck-Converter?

32 components, from 25 distinct parts. The full bill of materials is listed on this page.

Where can I download the LM5141-Synchronous-Buck-Converter design files?

From the farhad-ekramitalab/LM5141-Synchronous-Buck-Converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LM5141-Synchronous-Buck-Converter design in my own project?

The repository has no license, so all rights stay with farhad-ekramitalab. Use it as a reference, and ask the author before reusing the design.

Similar boards