Usb4butia
fedekau·butia_i2c·pcb/usb4butia/usb4butia.kicad_pcb
About the Usb4butia PCB
Usb4butia is an open source PIC PCB design by fedekau, published on GitHub. It is a board measuring 89 × 98.5 mm, with 50 components from 25 distinct parts.
Its main chip is the PIC18F4550, from the PIC family. By type, the board carries 17 resistors, 16 connectors, 8 capacitors, 3 relays, 2 switches and 2 diodes.
Main components on the Usb4butia
Usb4butia bill of materials (BOM)
50 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC18F4550 | 40DIP-ELL600 | U1 |
| 1 | 20MHz | HC-18UV | X1 |
| 1 | USB_B | USB_B | J1 |
| 6 | RJ45 | RJ45_8 | J2, J3, J4, J5, J6, J7 |
| 1 | PICkit2 | PIN_ARRAY_5x1 | P1 |
| 3 | CONN_2 | PIN_ARRAY_2X1 | P3, P4, P9 |
| 1 | CONN_4 | PIN_ARRAY_2X2 | P5 |
| 2 | CONN_1 | PINTST | P6, P7 |
| 1 | Bornier | bornier2 | P13 |
| 1 | CONN_2 | bornier2 | P14 |
| 1 | AX-12 | PIN_ARRAY_3X1 | K1 |
| 2 | CONN_3 | PIN_ARRAY_3X1 | K2, K3 |
| 1 | RST | SW_PUSH_SMALL | SW1 |
| 1 | PROG | SW_PUSH_SMALL | SW2 |
| 1 | LED | LEDV | D1 |
| 1 | 1N5819 | D5 | D2 |
| 2 | 22pF | C1 | C1, C2 |
| 4 | 0,1uF | C1 | C3, C7, C8, C9 |
| 1 | 0,47uF | C1 | C4 |
| 1 | 10uF | C1V8 | C10 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1K | R3 | R1, R14 |
| 1 | 1M | R3 | R2 |
| 11 | 10K | R3 | R3, R6, R7, R8, R9, R10, R12, R13 +3 |
| 2 | 390R | R3 | R4, R5 |
| 1 | 100R | R3 | R11 |
Usb4butia design files
The KiCad project lives in the fedekau/butia_i2c repository on GitHub; these links point at the commit this page was built from.
Usb4butia: common questions
What microcontroller does the Usb4butia use?
The Usb4butia is built around the PIC18F4550, from the PIC family.
How big is the Usb4butia PCB?
The Usb4butia measures 89 × 98.5 mm and is 1.6002 mm thick.
How many components are on the Usb4butia?
50 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Usb4butia design files?
From the fedekau/butia_i2c repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Usb4butia design in my own project?
The repository has no license, so all rights stay with fedekau. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Usb4butia without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in butia_i2c
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379