Sensor
Felix-Jr056·TECHIN514A-Wi26·FinalProject/KiCAD/Sensor/Sensor.kicad_pcb
About the Sensor PCB
Sensor is an open source PCB design by Felix-Jr056, published on GitHub. It is a 2-layer board measuring 61.2 × 40.6 mm, with 9 components from 6 distinct parts.
Other key parts include the LM317MBSTT3G. By type, the board carries 5 connectors, 3 resistors and 1 IC.
It belongs with the sensors, displays & leds and iot & wireless designs in this gallery.
From the project
Components used in the sensor device include: - Pressure Sensors: 3 FSRs (Force Sensitive Resistor). - Microcontroller: Custom PCB, may include FSR resistor network, status LED. - Wireless Module: For transmitting data to the display device (BLE). - Battery: Rechargeable LiPo bat
Components used in the sensor device include: - Pressure Sensors: 3 FSRs (Force Sensitive Resistor). - Microcontroller: Custom PCB, may include FSR resistor network, status LED. - Wireless Module: For transmitting data to the display device (BLE). - Battery: Rechargeable LiPo battery with battery indicator.
Components used in the display device include: - 1 Microcontroller: ESP32. - 1 Stepper motor driven gauge needle: To visually represent the user's posture. - 3 LEDs: Indicate the pressure level at each sensor. - 1 Button: For calibration and session reset functionality. - 1 Battery: Small…

Main components on the Sensor
Sensor bill of materials (BOM)
9 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM317MBSTT3G ~ | XIAO_ESP32 | U1 |
| 1 | CONN_01X04_PIN Battery | PinSocket_1x02_P2.54mm_Vertical | J1 |
| 3 | Conn_01x02_Socket | PinSocket_1x02_P2.54mm_Vertical | J2, J3, J4 |
| 1 | Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J5 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 2.7K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
Sensor design files
The KiCad project lives in the Felix-Jr056/TECHIN514A-Wi26 repository on GitHub; these links point at the commit this page was built from.
Sensor: common questions
How big is the Sensor PCB?
The Sensor measures 61.2 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensor?
9 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sensor design files?
From the Felix-Jr056/TECHIN514A-Wi26 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sensor design in my own project?
The repository has no license, so all rights stay with Felix-Jr056. Use it as a reference, and ask the author before reusing the design.
More boards in TECHIN514A-Wi26
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k