HardLabs

Connector

festlv·mso5000-logic-probe·connector-pcb/connector-pcb.kicad_pcb

Connector PCB layout, top view — open source board by festlv
Simulate this board

About the Connector PCB

Connector is an open source PCB design by festlv, published on GitHub under the MIT license. It is a 4-layer board measuring 79 × 39.1 mm, with 37 components from 11 distinct parts.

Other key parts include the MCP6002T-I/SN. By type, the board carries 26 resistors, 3 connectors, 3 diodes, 2 ICs, 2 capacitors and 1 fuse.

It belongs with the test & measurement designs in this gallery.

From the project

Cheap logic probe for Rigol MSO5000-series oscilloscopes

This project aims to be a somewhat lower performance but significantly cheaper alternative to Rigol's PLA2216 logic analyzer probe for MSO5000-series oscilloscopes.

The project is based on the design published by Gandalf_Sr on EEVBlog forum, with the most notable difference being that it should allow input signal threshold selection from the oscilloscope.

connector-pcb which plugs into oscilloscope, 2x probe-pcb's which connect to the aforementioned PCB via 24-pin IDC cables.

Connector, from the project README
From the project README

Main components on the Connector

MCP6002T-I/SN

Connector bill of materials (BOM)

37 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
MCP6002T-I/SN
MCP6002-xMS
Microchip
U1, U2
1
SFH11-PBPC-D25-RA-BK
MSO5000_LA
Sullins Connector Solutions
J1
2
B-3000S24P-0110
IDC_HEADER_2x12
Ckmtw(Shenzhen Cankemeng)
J2, J3
1
MF-FSMF020X-2
0.5A
BOURNS
F1
2
MM3Z3V9
3.9V 5%
Fosan
D1, D2
1
XL-1608SYGC-06
LED_GRN
XINGLIGHT
D3
2
CL10B104KB8NNNC
0.1uF
Samsung Electro-Mechanics
C1, C2
3
RC0603FR-071KL
1K
YAGEO
R1, R6, R10
2
RC0603FR-0715K8L
15K8
YAGEO
R2, R7
4
RC0603FR-0710KL
10K
YAGEO
R3, R4, R5, R8
17
RC0603FR-07100RL
100R
YAGEO
R9, R11, R12, R13, R14, R15, R16, R17 +9

Connector design files

The KiCad project lives in the festlv/mso5000-logic-probe repository on GitHub; these links point at the commit this page was built from.

Connector: common questions

How big is the Connector PCB?

The Connector measures 79 × 39.1 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Connector?

37 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Connector design files?

From the festlv/mso5000-logic-probe repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Connector design in my own project?

Yes, under the terms of its MIT license, which festlv chose for the repository.

More boards in mso5000-logic-probe

Similar boards