Analog-Waveform-Generator
FluxCapacitor37·Analog-Waveform-Generator
About the Analog-Waveform-Generator PCB
Analog-Waveform-Generator is an open source PCB design by FluxCapacitor37, published on GitHub. It is a board, with 3 components from 1 distinct parts.
Other key parts include the LM741.
It belongs with the test & measurement designs in this gallery.
From the project
Analog waveform generator designed to produce square, triangle, and sine waves using op-amp circuits. Includes Multisim simulations, KiCad PCB design, and hardware testing.
An analog waveform generator project designed to produce square, triangle, and sine waveforms using op-amp-based circuit stages. This repository tracks circuit simulation, PCB development, and hardware testing.
The design uses an op-amp oscillator to generate a square wave, an integrator stage to produce a triangle wave, and a subsequent waveform-shaping stage for a sine-like output. The circuit has been developed and tested with a split +5 V / −5 V supply.
Main components on the Analog-Waveform-Generator
Analog-Waveform-Generator bill of materials (BOM)
3 components, 1 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | LM741 | U1, U2, U3 |
Analog-Waveform-Generator design files
The KiCad project lives in the FluxCapacitor37/Analog-Waveform-Generator repository on GitHub; these links point at the commit this page was built from.
- SchematicAnalog-Waveform-Generator.kicad_sch
Analog-Waveform-Generator: common questions
How many components are on the Analog-Waveform-Generator?
3 components, from 1 distinct parts. The full bill of materials is listed on this page.
Where can I download the Analog-Waveform-Generator design files?
From the FluxCapacitor37/Analog-Waveform-Generator repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Analog-Waveform-Generator design in my own project?
The repository has no license, so all rights stay with FluxCapacitor37. Use it as a reference, and ask the author before reusing the design.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528