DG Nova PSU Connector Board w start up sequence
About the DG Nova PSU Connector Board w start up sequence
DG Nova PSU Connector Board w start up sequence is an open source PCB design by ForgottenMachines, published on GitHub. It is a 2-layer board measuring 130 × 90.9 mm, with 38 components from 8 distinct parts.
Other key parts include the 74HC14. By type, the board carries 22 connectors, 6 diodes, 6 resistors, 3 capacitors and 1 IC.
Main components on the DG Nova PSU Connector Board w start up sequence
DG Nova PSU Connector Board w start up sequence bill of materials (BOM)
38 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC14 | DIP-14_W7.62mm | U1 |
| 1 | Conn_02x07_Counter_Clockwise | 52 Pin Connector | J1 |
| 2 | Conn_01x12 | PinHeader_1x12_P2.54mm_Vertical | J2, J3 |
| 15 | Conn_01x06 | PinHeader_1x06_P2.54mm | J8, J9, J10, J11, J12, J13, J14, J15 +7 |
| 4 | Conn_01x11 | PinHeader_1x11_P2.54mm | J23, J24, J25, J26 |
| 6 | 1N4004 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6 |
| 3 | C | C_Disc_D6.0mm_W2.5mm_P5.00mm | C1, C2, C3 |
| 6 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6 |
DG Nova PSU Connector Board w start up sequence design files
The KiCad project lives in the ForgottenMachines/Data-General-Nova repository on GitHub; these links point at the commit this page was built from.
DG Nova PSU Connector Board w start up sequence: common questions
How big is the DG Nova PSU Connector Board w start up sequence?
The DG Nova PSU Connector Board w start up sequence measures 130 × 90.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DG Nova PSU Connector Board w start up sequence?
38 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the DG Nova PSU Connector Board w start up sequence design files?
From the ForgottenMachines/Data-General-Nova repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DG Nova PSU Connector Board w start up sequence design in my own project?
The repository has no license, so all rights stay with ForgottenMachines. Use it as a reference, and ask the author before reusing the design.
More boards in Data-General-Nova
AVR/ArduinoNova 1200 front panel
397.5 × 119.4 mm203 parts2LNo license5
RP2040/RP2350DG Nova CPU Tester
426.8 × 140.3 mm124 parts2LNo license5
RP2040/RP2350Before Huzaifa Antuley fixed DRC
426.8 × 131.5 mm123 parts2LNo license5
RP2040/RP2350After Huzaifa Antuley fixed DRC
426.8 × 131.5 mm123 parts2LNo license5
Nova modern
379 × 139.7 mm45 parts2LNo license5
D-116 Connector Board w start up sequence
130 × 90.9 mm38 parts2LNo license5
RP2040/RP2350Piggyback 3v3
368.3 × 90.8 mm22 parts2LNo license5
Card-Edge Adapter
379 × 83.8 mm10 parts2LNo license5
AVR/ArduinoDG Nova Front Panel Tester
114 × 99 mm9 parts2LNo license5
Backplane Socket Board
379 × 83.8 mm6 parts2LNo license5
Backplane Wire-Wrap Side Plug
170.8 × 29.3 mm3 parts2LNo license5