224 open source boards using the 74HC14

Real designs built with the 74HC14, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

224 boardsClear filters|Most starred

How designs wire the 74HC14

Read from the KiCad layouts of 147 open source designs, one per repository: what each pin of the 74HC14 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 90 of 145 designs, most often 100 nF (then 1 µF).
  • Pin 1 has a series resistor on 62 of 147 designs, most often 10 kΩ (then 1 kΩ).
Pin 1Connected to: Signal 90%
  • Series resistor on 42% · 10 kΩ (26), 1 kΩ (10), 100 kΩ (6)
  • Capacitor to GND on 32% · 100 nF (16), 10 µF (7), 1 µF (5)
Pin 3Connected to: Signal 70% · not connected 22%
  • Series resistor on 38% · 10 kΩ (16), 1 kΩ (7), 100 Ω (4)
Pin 5Connected to: Signal 71% · not connected 16%
  • Series resistor on 35% · 10 kΩ (19), 1 kΩ (14), 5.1 kΩ (4)
GNDpin 7Connected to: GND 98%
VCCpin 14Connected to: 5V 91%
  • Decoupling capacitor on 62% · 100 nF (80), 1 µF (8), 4.7 µF (3)

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ISA adapter by polpo, MCL65+ by MicroCoreLabs, BlueSCSI V2, Centronics 50 Pin, 2024.03a by BlueSCSI and Smu front 1 by jaromir-sukuba.

The 74HC14 in open source designs

The gallery holds 224 open source boards using the 74HC14 from 152 GitHub repositories; a typical one measures about 102.4 × 96.8 mm and carries around 70 components.

76% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.

The most starred is ISA adapter by polpo.

74HC14: common questions

Where can I find a 74HC14 reference design?

Each of the 224 boards on this page is a real design using the 74HC14. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HC14 VCC pin?

The VCC pin has a decoupling capacitor on 90 of 145 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 147 open source designs using the 74HC14.

What resistor goes on the 74HC14 pin 1?

Pin 1 has a series resistor on 62 of 147 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 147 open source designs using the 74HC14.

What parts are used alongside the 74HC14?

The 74HC74, 74HC00, 74HC08, 74HC245 and 74HC32 appear in the most repositories here.

Which microcontrollers do boards using the 74HC14 use?

Most are built on AVR/Arduino (22), STM32 (14), RP2040/RP2350 (9) and ESP32 (7).

How big is a typical board using the 74HC14?

The median is 102.4 × 96.8 mm, and 76% are two-layer designs.

What is the most popular open source board using the 74HC14?

By GitHub stars, ISA adapter by polpo, with 800 stars.

Can I simulate one of these boards using the 74HC14 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part