Lorawan water node
franzenhof·lorawan-water-node·pcb/v1.0/lorawan-water-node.kicad_pcb
About the Lorawan water node PCB
Lorawan water node is an open source PCB design by franzenhof, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 196 components from 91 distinct parts.
Other key parts include the ST L78L33ACUTR (SOT-89), TI SN74LVC2G14DBVR, ADUM121N1BRZ-RL7 (alt. ISO7721DR C366164), Goodwork PC817C (SMD-4) and TI LMR36510ADDAR (4.2-65 V, 1 A buck). By type, the board carries 58 resistors, 38 capacitors, 36 diodes, 16 jumpers, 15 ICs and 14 connectors.
It belongs with the sensors, iot & wireless and rf & radio designs in this gallery.
From the project
LoRaWAN Water Node – Spring & Reservoir Monitor (Heltec WiFi LoRa V3)
Firmware for a custom-built PCB based on the Heltec WiFi LoRa 32 V3 (ESP32-S3). The node measures flow rate, water level, and process temperatures at a natural spring or water reservoir, and transmits all data via LoRaWAN (OTAA, region configurable; default: EU868) to a ChirpStack server. The BME280 values are used mainly for enclosure health monitoring (humidity ingress + electronics thermal state), not as a primary water-process sensor.

Main components on the Lorawan water node
Lorawan water node bill of materials (BOM)
196 components, 91 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ST L78L33ACUTR (SOT-89) 78L33 | SOT-89-3 | U1 |
| 2 | TI SN74LVC2G14DBVR SN74LVC2G14DBVR | SOT-23-6 | U2, U9 |
| 2 | ADUM121N1BRZ-RL7 (alt. ISO7721DR C366164) ADuM121N1BRZ | SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 1 | Goodwork PC817C (SMD-4) PC817 SMD | SMDIP-4_W9.53mm | U5 |
| 1 | TI LMR36510ADDAR (4.2-65 V, 1 A buck) LMR36510ADDAR | Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U6 |
| 1 | Aerosemi MT3608 MT3608 | SOT-23-6 | U7 |
| 1 | TI ADS1115IDGSR ADS1115IDGSR | TSSOP-10_3x3mm_P0.5mm | U10 |
| 1 | TI SN74LVC1G14DBVR SN74LVC1G14DBVR | SOT-23-5 | U11 |
| 3 | TI SN74AHCT1G125DCKR (SC-70-5) SN74AHCT1G125DCKR | SOT-353_SC-70-5 | U12, U13, U14 |
| 1 | Torex XC6206P332MR-G (basic) XC6206P332MR | SOT-23 | U15 |
| 1 | TI TPS16630PWPR (60 V 6 A eFuse, HTSSOP-20) TPS16630PWPR | HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.96x2.96mm_ThermalVias | U16 |
| 4 | AO3401A | SOT-23 | Q1, Q2, Q5, Q10 |
| 2 | AOS AO3400A AO3400A | SOT-23 | Q3, Q4 |
| 3 | AOS AON7264E (60 V N-MOSFET, DFN 3.3x3.3) AON7264E | Vishay_PowerPAK_1212-8_Single | Q6, Q7, Q11 |
| 1 | Vishay SI2309CDS-T1-GE3 SI2309CDS | SOT-23 | Q8 |
| 1 | 2N7002 (60 V) 2N7002 | SOT-23 | Q9 |
| 1 | NCE60P50K (60 V P-MOSFET, TO-252) NCE60P50K | TO-252-2 | Q12 |
| 1 | Kinghelm KH-2.54FH-1X18P-H8.5 Heltec V3 header (5V side) | PinSocket_1x18_P2.54mm_Vertical | J1 |
| 1 | Kinghelm KH-2.54FH-1X18P-H8.5 Heltec V3 header (3V3 side) | PinSocket_1x18_P2.54mm_Vertical | J2 |
| 1 | DB125-3.5-2P-GN-S VIN 6-33V | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J3 |
Show 71 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DB125-3.5-4P-GN-S Pulse inputs | TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J4 |
| 1 | DB125-3.5-2P-GN-S Level 4-20mA | TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J7 |
| 1 | DB125-3.5-3P-GN-S 1-Wire | TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal | J8 |
| 1 | DB125-3.5-4P-GN-S VE.Direct | TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J9 |
| 1 | DB125-3.5-6P-GN-S DALY BMS | TerminalBlock_Phoenix_PT-1,5-6-3.5-H_1x06_P3.50mm_Horizontal | J10 |
| 1 | LXWCONN 254PZ-1x4P-V BME280 | PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | JST B4B-PH-K-S(LF)(SN) VE.Direct (JST-PH) | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J12 |
| 1 | JST B6B-PH-K-S(LF)(SN) DALY UART (PH2.0) | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J13 |
| 1 | HX PZ2.54-1x8P ZZ Expansion | PinHeader_1x08_P2.54mm_Vertical | J16 |
| 1 | DB125-3.5-5P-GN-S Outputs VIN | TerminalBlock_Phoenix_PT-1,5-5-3.5-H_1x05_P3.50mm_Horizontal | J17 |
| 1 | DB125-3.5-6P-GN-S Inputs | TerminalBlock_Phoenix_PT-1,5-6-3.5-H_1x06_P3.50mm_Horizontal | J18 |
| 1 | BHFUSE BSMD2920-100-60V PTC 1.1A 60V | Fuse_2920_7451Metric | F1 |
| 1 | nSMD025 (16V) PTC 0.25A | Fuse_1206_3216Metric | F2 |
| 2 | Littelfuse 1206L005/60NR (60V) PTC 0.05A | Fuse_1206_3216Metric | F3, F4 |
| 1 | nSMD010 (60V) PTC 0.1A | Fuse_1206_3216Metric | F5 |
| 1 | LXWCONN 254PZ-1x2P-V I2C pull-up SCL | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LXWCONN 254PZ-1x2P-V I2C pull-up SDA | PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | BOOMELE 2.54-1*3P DALY VDD: 1-2 BMS, 2-3 78L33 | PinHeader_1x03_P2.54mm_Vertical | JP3 |
| 1 | LXWCONN 254PZ-1x2P-V 78L33 on/off | PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 1 | LXWCONN 254PZ-1x2P-V DALY wakeup enable | PinHeader_1x02_P2.54mm_Vertical | JP5 |
| 1 | BOOMELE 2.54-1*3P J13.5: 1-2 TX (1:1 cable), 2-3 RX (crossed) | PinHeader_1x03_P2.54mm_Vertical | JP6 |
| 1 | BOOMELE 2.54-1*3P J13.6: 1-2 RX (1:1 cable), 2-3 TX (crossed) | PinHeader_1x03_P2.54mm_Vertical | JP7 |
| 1 | LXWCONN 254PZ-1x2P-V 5V BUCK | PinHeader_1x02_P2.54mm_Vertical | JP8 |
| 1 | BOOMELE 2.54-1*3P IN supply: 1-2 3V3, 2-3 3V3 switched | PinHeader_1x03_P2.54mm_Vertical | JP9 |
| 1 | BOOMELE 2.54-1*3P PULSE supply: 1-2 3V3, 2-3 3V3 switched | PinHeader_1x03_P2.54mm_Vertical | JP10 |
| 1 | LXWCONN 254PZ-1x2P-V Filter ch1 | PinHeader_1x02_P2.54mm_Vertical | JP11 |
| 1 | LXWCONN 254PZ-1x2P-V Filter ch2 | PinHeader_1x02_P2.54mm_Vertical | JP12 |
| 1 | BOOMELE 2.54-1*3P IN1 pull: 1-2 up, 2-3 down | PinHeader_1x03_P2.54mm_Vertical | JP13 |
| 1 | BOOMELE 2.54-1*3P IN2 pull: 1-2 up, 2-3 down | PinHeader_1x03_P2.54mm_Vertical | JP14 |
| 1 | BOOMELE 2.54-1*3P IN3 pull: 1-2 up, 2-3 down | PinHeader_1x03_P2.54mm_Vertical | JP15 |
| 1 | HX PZ2.54-2x3P ZZ OC pull: 1-3 up, 3-5 down | PinHeader_2x03_P2.54mm_Vertical | JP16 |
| 5 | onsemi BZX84C5V6LT1G BZX84C5V6 | SOT-23 | D3, D19, D26, D27, D29 |
| 4 | R+O BAT54S (preferred) BAT54S | SOT-23 | D4, D5, D33, D34 |
| 2 | SMBJ6.0A | D_SMB | D6, D7 |
| 1 | SMBJ24A | D_SMB | D8 |
| 1 | SMBJ5.0A | D_SMB | D9 |
| 1 | SMLVT3V3 | D_SMB | D10 |
| 5 | SS210 (100 V 2 A Schottky, basic) SS210 | D_SMA | D11, D13, D18, D21, D36 |
| 1 | SMBJ33CA (bidirectional) SMBJ33CA | D_SMB | D12 |
| 1 | Nexperia PESD36VS2UT,215 (36 V, 2 lines) PESD36VS2UT | SOT-23 | D14 |
| 3 | Nexperia PESD5V0S2BT,215 PESD5V0S2BT | SOT-23 | D15, D16, D17 |
| 5 | SMAJ33CA (400 W, bidirectional) SMAJ33CA | D_SMA | D22, D23, D28, D31, D32 |
| 3 | Nexperia BAS70-06,215 (70 V Schottky, common anode) BAS70-06 | SOT-23 | D24, D25, D40 |
| 2 | BZT52C12 (preferred) BZT52C12 | D_SOD-123 | D30, D37 |
| 2 | BAV70 (common cathode, basic) BAV70 | SOT-23 | D38, D39 |
| 1 | Sunlord SWPA6045S220MT 22uH | L_Sunlord_SWPA6045S | L1 |
| 1 | Sunlord SWPA4030S220MT 22uH | L_Sunlord_SWPA4030S | L2 |
| 4 | Samsung CL21A226MAQNNNE (25V X5R) 22uF 25V | C_0805_2012Metric | C1, C2, C19, C20 |
| 4 | Yageo CC1210KKX7R9BB106 10uF 50V | C_1210_3225Metric | C3, C4, C22, C23 |
| 21 | Yageo CC0805KRX7R9BB104 100nF | C_0805_2012Metric | C5, C6, C8, C9, C10, C11, C12, C13 +13 |
| 2 | Samsung CL21B473KBCNNNC (50V X7R, basic) 47nF | C_0805_2012Metric | C7, C24 |
| 1 | FS32X106K101EGG (100V X7R 1210) 10uF 100V | C_1210_3225Metric | C16 |
| 1 | Yageo CC0805KKX7R0BB224 (100V X7R) 220nF 100V | C_0805_2012Metric | C17 |
| 4 | Samsung CL21B105KBFNNNE (50V X7R) 1uF | C_0805_2012Metric | C29, C36, C37, C38 |
| 1 | Samsung CL21B104KCFNNNE (100V X7R) 100nF 100V | C_0805_2012Metric | C39 |
| 2 | UniOhm 0805W8F100JT5E 10 | R_0805_2012Metric | R1, R2 |
| 1 | UniOhm 0805W8F330JT5E 33 | R_0805_2012Metric | R3 |
| 1 | Yageo RT1206BRD07120RL 120 0.1% | R_1206_3216Metric | R4 |
| 4 | UniOhm 0805W8F2200T5E 220 | R_0805_2012Metric | R5, R26, R34, R58 |
| 9 | UniOhm 0805W8F1002T5E 10k | R_0805_2012Metric | R6, R13, R16, R17, R25, R30, R49, R54 +1 |
| 2 | UniOhm 0805W8F1001T5E 1k | R_0805_2012Metric | R7, R8 |
| 1 | UniOhm 0805W8F2201T5E 2.2k | R_0805_2012Metric | R9 |
| 5 | UniOhm 0805W8F4701T5E 4.7k | R_0805_2012Metric | R10, R11, R12, R15, R32 |
| 2 | UniOhm 1206W4F1002T5E (250 mW) 10k | R_1206_3216Metric | R14, R31 |
| 17 | UniOhm 0805W8F1003T5E 100k | R_0805_2012Metric | R18, R19, R27, R28, R29, R35, R36, R37 +9 |
| 1 | UniOhm 0805W8F3603T5E 360k | R_0805_2012Metric | R24 |
| 7 | UniOhm 0805W8F4702T5E 47k | R_0805_2012Metric | R38, R39, R45, R47, R51, R53, R65 |
| 1 | UniOhm 0805W8F2492T5E 24.9k | R_0805_2012Metric | R41 |
| 3 | UniOhm 0402WGF1003TCE 100k | R_0402_1005Metric | R60, R61, R62 |
| 1 | UniOhm 0805W8F1004T5E 1M | R_0805_2012Metric | R63 |
| 1 | UniOhm 0805W8F3301T5E 3.3k | R_0805_2012Metric | R64 |
Lorawan water node design files
The KiCad project lives in the franzenhof/lorawan-water-node repository on GitHub; these links point at the commit this page was built from.
Lorawan water node: common questions
How big is the Lorawan water node PCB?
The Lorawan water node measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lorawan water node?
196 components, from 91 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lorawan water node design files?
From the franzenhof/lorawan-water-node repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lorawan water node design in my own project?
Yes, under the terms of its MIT license, which franzenhof chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k