FreeDSP-StdConnectorAdapter
freeDSP·freeDSP-StdConnectorAdapter·SOURCES/Kicad/freeDSPx-ADAPTER.kicad_pcb
About the FreeDSP-StdConnectorAdapter PCB
FreeDSP-StdConnectorAdapter is an open source PCB design by freeDSP, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 80 × 50 mm, with 35 components from 20 distinct parts.
Other key parts include the 74AC14, LM284x and 74AC74. By type, the board carries 9 capacitors, 7 resistors, 6 connectors, 3 ICs, 3 jumpers and 3 diodes.
From the project
Adapter of the old freeDSP Classic connector to the new freeDSP standard connector.
Adapter for the freeDSP Classic. Adapts the old expansion pinheader to I2S standard connectors. Generates masterclock.
This work and all other materials under https://github.com/freeDSP are licensed under a Creative Commons Attribution Share-Alike 4.0 license. This allows for both personal and commercial derivative works, as long as they credit freeDSP and release their designs under the same license.
Main components on the FreeDSP-StdConnectorAdapter
FreeDSP-StdConnectorAdapter bill of materials (BOM)
35 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74AC14 | SO14_3.9x8.7mm_Pitch1.27mm | U1 |
| 1 | LM284x | SOT23-6_1.7x3.0mm_Pitch0.95mm | U2 |
| 1 | 74AC74 | SO14_3.9x8.7mm_Pitch1.27mm | U3 |
| 1 | Crystal_Oszillator | XO91_HandSoldering | X1 |
| 1 | CONN_01X02 | RIACON101-2 | P1 |
| 1 | CONN_02X11 | Pin_Header_Straight_2x11 | P2 |
| 4 | STDCONN | IDC_Header_Straight_16pins | P3, P4, P5, P6 |
| 1 | Jumper_NO_Small | Pin_Header_Straight_1x02 | JP1 |
| 2 | JUMPER3 | Pin_Header_Straight_1x03 | JP2, JP3 |
| 1 | P6SMB 27V | SMB | D1 |
| 2 | B140 | SMA | D2, D3 |
| 2 | 330 | C_0805_HandSoldering | FB1, FB2 |
| 1 | 47u | Choke_SMD_7.3x7.3_HandSoldering | L1 |
| 6 | 100n | C_0805_HandSoldering | C1, C2, C3, C5, C7, C8 |
| 1 | 4u7 | C_1206_HandSoldering | C4 |
| 1 | 22u | C_1206_HandSoldering | C6 |
| 1 | 10u | C_1206_HandSoldering | C12 |
| 1 | 1k | R_0805_HandSoldering | R1 |
| 1 | 3k3 | R_0805_HandSoldering | R2 |
| 5 | 33 | R_0805_HandSoldering | R3, R4, R5, R6, R7 |
FreeDSP-StdConnectorAdapter design files
The KiCad project lives in the freeDSP/freeDSP-StdConnectorAdapter repository on GitHub; these links point at the commit this page was built from.
FreeDSP-StdConnectorAdapter: common questions
How big is the FreeDSP-StdConnectorAdapter PCB?
The FreeDSP-StdConnectorAdapter measures 80 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FreeDSP-StdConnectorAdapter?
35 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the FreeDSP-StdConnectorAdapter design files?
From the freeDSP/freeDSP-StdConnectorAdapter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the FreeDSP-StdConnectorAdapter design in my own project?
Yes, under the terms of its GPL-3.0 license, which freeDSP chose for the repository.