6 open source boards using the 74AC14
Real designs built with the 74AC14, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Loran c proc board
romavis
170 × 100 mm243 parts4LCC-BY-SA-4.07ESP32
Serrasoid TRX 29M
kazushinjo
170 × 150 mm328 parts4LGPL-3.00FreeDSP-StdConnectorAdapter
freeDSP
80 × 50 mm35 parts2LGPL-3.00CFT Board 1
alexiosc
233.4 × 280 mm222 parts2LGPL-3.06Cpu new
Noah1989
160 × 100 mm58 parts2LMIT2Keyboard
Noah1989
160 × 100 mm39 parts2LMIT2
How designs wire the 74AC14
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74AC14 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 7 is tied to GND on 5 of 5 designs.
- Pin 14 has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF).
- Pin 14 is tied to 5V on 4 of 5 designs.
- Pin 10 has a series resistor on 3 of 5 designs, most often 10 Ω (then 33 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 2 | Connected to: Signal 60% · not connected 40% |
|
| Pin 4 | Connected to: Signal 80% · not connected 20% |
|
| Pin 6 | Connected to: Signal 80% · not connected 20% |
|
| Pin 7 | Connected to: GND 100% | — |
| Pin 8 | Connected to: Signal 80% · not connected 20% |
|
| Pin 9 | Connected to: Signal 80% · 5V 20% |
|
| Pin 10 | Connected to: Signal 80% · not connected 20% |
|
| Pin 11 | Connected to: Signal 80% · 5V 20% |
|
| Pin 12 | Connected to: Not connected 60% · a signal 40% |
|
| Pin 13 | Connected to: 5V 40% · GND 20% · a signal 40% |
|
| Pin 14 | Connected to: 5V 80% · a signal 20% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Loran c proc board by romavis, CFT Board 1 by alexiosc, Cpu new by Noah1989 and FreeDSP-StdConnectorAdapter by freeDSP.
The 74AC14 in open source designs
The gallery holds 6 open source boards using the 74AC14 from 5 GitHub repositories; a typical one measures about 165 × 100 mm and carries around 140 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Loran c proc board by romavis.
What boards using the 74AC14 are built for
74AC14: common questions
Where can I find a 74AC14 reference design?
Each of the 6 boards on this page is a real design using the 74AC14. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74AC14 pin 7 connected?
Pin 7 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74AC14.
What decoupling capacitors do designs use on the 74AC14 pin 14?
Pin 14 has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the 74AC14.
What resistor goes on the 74AC14 pin 10?
Pin 10 has a series resistor on 3 of 5 designs, most often 10 Ω (then 33 Ω). Counted from the KiCad layouts of 5 open source designs using the 74AC14.
What parts are used alongside the 74AC14?
The 74AC74, 74AC86 and L7805 appear in the most repositories here.
Which microcontrollers do boards using the 74AC14 use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the 74AC14?
The median is 165 × 100 mm, and 67% are two-layer designs.
What is the most popular open source board using the 74AC14?
By GitHub stars, Loran c proc board by romavis, with 7 stars.
Can I simulate one of these boards using the 74AC14 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.