11 open source boards using the 74AC74

Real designs built with the 74AC74, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the 74AC74

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74AC74 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 10 µF).
  • The S pins is tied to 5V on 81% of them (a signal on 2).
  • The R pins is tied to 5V on 69% of them (a signal on 4).
Rpin 1, 13Connected to: 5V 69% · a signal 25%
Spin 4, 10Connected to: 5V 81%
GNDpin 7Connected to: GND 100%
VCCpin 14Connected to: 5V 100%
  • Decoupling capacitor on 75% · 100 nF (6), 10 µF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 65816-computer by mike42, SDRBackup by KonradMcClure, CFT Processor Board 0 by alexiosc and Ayn dc by afiskon.

The 74AC74 in open source designs

The gallery holds 11 open source boards using the 74AC74 from 8 GitHub repositories; a typical one measures about 101.6 × 100 mm and carries around 92 components.

82% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.

The most starred is 65816-computer by mike42.

Microcontrollers on boards using the 74AC74

74AC74: common questions

Where can I find a 74AC74 reference design?

Each of the 11 boards on this page is a real design using the 74AC74. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74AC74 VCC pin?

The VCC pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the 74AC74.

How is the 74AC74 S pin connected?

The S pins is tied to 5V on 81% of them (a signal on 2). Counted from the KiCad layouts of 8 open source designs using the 74AC74.

How is the 74AC74 R pin connected?

The R pins is tied to 5V on 69% of them (a signal on 4). Counted from the KiCad layouts of 8 open source designs using the 74AC74.

What parts are used alongside the 74AC74?

The 74AC14, 74AC86, 74AC00, 74AC08 and 74AC138 appear in the most repositories here.

Which microcontrollers do boards using the 74AC74 use?

Most are built on AVR/Arduino (3) and ESP32 (1).

How big is a typical board using the 74AC74?

The median is 101.6 × 100 mm, and 82% are two-layer designs.

What is the most popular open source board using the 74AC74?

By GitHub stars, 65816-computer by mike42, with 34 stars.

Can I simulate one of these boards using the 74AC74 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part