Zigbee raspberry module

freehand-dev·zigbee-raspberry-module

Zigbee raspberry module layout, top view — open source board by freehand-dev

About the Zigbee raspberry module

Zigbee raspberry module is an open source PCB design by freehand-dev, published on GitHub. It is a 2-layer board measuring 23.1 × 45.7 mm, with 10 components from 8 distinct parts.

Other key parts include the CC2538_CC2592 and DS3231M. By type, the board carries 4 resistors, 2 ICs, 2 connectors and 1 capacitor.

It belongs with the iot & wireless and usb & debug tools designs in this gallery.

From the project

./cc2538-prog -d /dev/ttyAMA0 -f MODKAMRUV3UART-no-flow-controlwithSBL.hex

./cc2538-prog -d /dev/ttyAMA0 -f MODKAMRUV3UART-no-flow-controlwithSBL.hex

Reset the module using the RESET button.

- In the configuration tool, select Interfacing Option. - Then enable I2C by selecting P5 I2C. - After enabling the I2C.

We need to install python-smbus i2c-tools to see whether our Raspberry Pi detected our I2C connection from the RTC module.

sudo apt-get install python-smbus i2c-tools sudo i2cdetect -y 1

Zigbee raspberry module, from the project README
From the project README

Main components on the Zigbee raspberry module

CC2538_CC2592DS3231M

Zigbee raspberry module bill of materials (BOM)

10 components, 8 distinct parts.

QtyPartRefs
1
CC2538_CC2592
U1
1
DS3231M
U2
1
Conn_02x05_Odd_Even
J1
1
BK-870
J2
1
Conn_01x07
JTAG1
1
33uF
C1
1
1k
R1
3
10k
R2, R3, R4

Zigbee raspberry module design files

The KiCad project lives in the freehand-dev/zigbee-raspberry-module repository on GitHub; these links point at the commit this page was built from.

Zigbee raspberry module: common questions

How big is the Zigbee raspberry module?

The Zigbee raspberry module measures 23.1 × 45.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Zigbee raspberry module?

10 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Zigbee raspberry module design files?

From the freehand-dev/zigbee-raspberry-module repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Zigbee raspberry module design in my own project?

The repository has no license, so all rights stay with freehand-dev. Use it as a reference, and ask the author before reusing the design.

Similar boards