91 open source boards using the DS3231M
Real designs built with the DS3231M, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Wall Panel
dotstartech
75 × 79 mm99 parts8LCERN-OHL-W-2.0366V5 main
zynthian
245.2 × 100 mm144 parts2LNo license156ESP32
Hardware design
Open-Authenticator
82 × 42 mm56 parts2LMIT42RP2040/RP2350
EnvOpenClock
Envious-Data
90 × 65.2 mm326 parts2LMIT36ESP32
Dual button doorbell
espena
68.6 × 68.6 mm79 parts4LGPL-3.026AVR/Arduino
Picon one hw
fm4dd
117.8 × 168 mm59 parts2LCERN-OHL-1.223Raspberry Pi
PiUPS
diminDDL
87.4 × 56 mm110 parts2LCERN-OHL-W-2.015Ass shield
immortalserg
79.6 × 79.6 mm200 parts2LNo license12AVR/Arduino
Kicad Smart Watch
AFLProjects
36.4 × 29.4 mm48 parts2LNo license12ESP32
ESP32-Sensor-Data-Logger
jminjares4
83.8 × 41.4 mm67 parts2LNo license11ESP32
Zeen-AI-Plug
ampnics
105 × 58 mm71 parts2LNo license9ESP32
Mesh hand
sneakylizard123-4
50 × 75 mm67 parts4LNo license8AVR/Arduino
BerlinUhr
designer2k2
100 × 130.1 mm53 parts2LGPL-3.07AVR/Arduino
Smart penetrometer v0.4.0
ARTS-Laboratory
33 × 74.9 mm44 parts2LCC-BY-SA-4.06PIC
ILV2-7-5 VFD Display
biomurph
92 × 76 mm50 parts2LGPL-3.03ESP32
Schrodinger-Clock-PCB-Watch-
nithinmathewjoji
45.7 × 60.2 mm40 parts2LMIT3RP2040/RP2350
Karabas go
andykarpov
101.6 × 147.3 mm279 parts4LCC-BY-NC-4.02ESP32
ESP32-S3 Cellular GNSS Tracker
meerzafarnoohani
45.3 × 119.6 mm118 parts2LMIT2AVR/Arduino
Als311-clock
ugolnikovE
100 × 70 mm55 parts2LMIT2ESP32
Kiki player
alaotach
86 × 109.7 mm42 parts2LNo license2AVR/Arduino
I protect2.0
PsVenom
49.5 × 21.6 mm30 parts4LNo license2PIC
Pcb pi onoff
bablokb
65 × 30 mm29 parts2LCC-BY-SA-4.02RP2040/RP2350
MDFPGA
aslak3
99.1 × 73.7 mm54 parts4LGPL-2.01ESP32
PressLog
bansalsaksham
117 × 81.5 mm45 parts2LNo license1Nxp mcxn947-datalogger
Doly02
118.1 × 55 mm38 parts2LNo license1AVR/Arduino
IV6Clock2 base
SarahAlroe
99.1 × 45.7 mm36 parts2LNo license1ESP32
Supla ESP32 LAN
jaku2019
209 × 85.5 mm211 parts2LNo license0CoreLight
llextv
170.7 × 119 mm192 parts4LNo license0STM32
PCB ApiaryWaterDispensingSystem
Mateuszworo97
217.3 × 127.3 mm182 parts2LNo license0AVR/Arduino
Wordclock
maelgui
221 × 221 mm153 parts2LNo license0ESP32
Mega2560plus
sneakylizard123-4
53.3 × 101.6 mm138 parts4LNo license0RP2040/RP2350
Sentinel HYDRA
dhruv1859
93.5 × 91 mm135 parts6LApache-2.00AVR/Arduino
Digit Colon
kuellenberg
140.5 × 213 mm108 parts2LNo license0Astra-Companion-NOISEEE
atireksd11
122 × 140 mm103 parts4LNo license0ESP8266
MB02A2
GOS2022
130 × 105 mm96 parts2LMIT0RP2040/RP2350
Memetrol base
Cortog
64 × 130 mm81 parts2LNo license0
How designs wire the DS3231M
Read from the KiCad layouts of 69 open source designs, one per repository: what each pin of the DS3231M connects to, and the resistors, capacitors and other passives placed on it.
- The 32KHZ pin is left unconnected on 61 of 69 designs (a signal on 8).
- The SDA pin has a pull-up to 3.3V on 45 of 64 designs, most often 4.7 kΩ (then 10 kΩ).
- The SCL pin has a pull-up to 3.3V on 45 of 64 designs, most often 4.7 kΩ (then 10 kΩ).
- The RST pin is left unconnected on 51 of 69 designs (a signal on 17).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 32KHZpin 1 | Connected to: Not connected 88% | — |
| VCCpin 2 | Connected to: 3.3V 83% · a signal 17% |
|
| RSTpin 4 | Connected to: Not connected 74% · a signal 25% | — |
| GNDpin 5, 6, 7, 8, 9, 10, 11, 12, 13 | Connected to: GND 95% | — |
| SDApin 15 | Connected to: The microcontroller 53%, a connector 28% |
|
| SCLpin 16 | Connected to: The microcontroller 56%, a connector 28% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Wall Panel by dotstartech, V5 main by zynthian, Hardware design by Open-Authenticator and Inki by c0de111.
The DS3231M in open source designs
The gallery holds 91 open source boards using the DS3231M from 72 GitHub repositories; a typical one measures about 81 × 73.7 mm and carries around 55 components.
79% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.
The most starred is Wall Panel by dotstartech.
Parts used alongside the DS3231M
Microcontrollers on boards using the DS3231M
What boards using the DS3231M are built for
DS3231M: common questions
Where can I find a DS3231M reference design?
Each of the 91 boards on this page is a real design using the DS3231M. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DS3231M 32KHZ pin connected?
The 32KHZ pin is left unconnected on 61 of 69 designs (a signal on 8). Counted from the KiCad layouts of 69 open source designs using the DS3231M.
What pull-up resistor is used on the DS3231M SDA pin?
The SDA pin has a pull-up to 3.3V on 45 of 64 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 69 open source designs using the DS3231M.
What pull-up resistor is used on the DS3231M SCL pin?
The SCL pin has a pull-up to 3.3V on 45 of 64 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 69 open source designs using the DS3231M.
What parts are used alongside the DS3231M?
The AMS1117-3.3, ESP32-S3-WROOM-1, USBLC6-2P6, ESP32-WROOM-32 and AP2112K-3.3 appear in the most repositories here.
Which microcontrollers do boards using the DS3231M use?
Most are built on AVR/Arduino (30), ESP32 (28), RP2040/RP2350 (6) and STM32 (5).
How big is a typical board using the DS3231M?
The median is 81 × 73.7 mm, and 79% are two-layer designs.
What is the most popular open source board using the DS3231M?
By GitHub stars, Wall Panel by dotstartech, with 366 stars.
Can I simulate one of these boards using the DS3231M before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.