Schalldruckpegelmessgerät
Froster2406·BAT2024·Hardware/BAT2024.kicad_pcb
About the Schalldruckpegelmessgerät PCB
Schalldruckpegelmessgerät is an open source Silicon Labs PCB design by Froster2406, published on GitHub. It is a 2-layer board measuring 60 × 60 mm, with 41 components from 18 distinct parts.
Its main chip is the BGM220PC22WGA2R, from the Silicon Labs family. Other key parts include the M95P16-IXMNT/E, LP55231SQX/NOPB, MIC5504-3.3YM5 and BQ21040DBVR. By type, the board carries 11 resistors, 10 capacitors, 8 LEDs, 5 ICs, 1 transistor and 1 connector.
Main components on the Schalldruckpegelmessgerät
Schalldruckpegelmessgerät bill of materials (BOM)
41 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BGM220PC22WGA2R | BGM220PC22WGA2R | IC1 |
| 1 | M95P16-IXMNT/E EEPROM_M95P16-IXMNT_E | EEPROM_SOIC127P600X175-8L | IC2 |
| 1 | LP55231SQX/NOPB LED-Driver_LP55231SQX_NOPB | LED-Driver-QFN50P400X400X80-25N | IC3 |
| 1 | MIC5504-3.3YM5 | SOT-23-5 | U1 |
| 1 | BQ21040DBVR | BatteryManagement_SOT95P280X145-6N | U2 |
| 1 | SSM3J334R,LF | SSM3J334RLF | Q1 |
| 1 | USB4125-GF-A | USB4125GFA | J1 |
| 1 | 1210L020WR Littlefuse_1210L020WR | Littlefuse_FUSC3226X100N | F1 |
| 1 | 1025-7 BatteryHolder_1025-7 | BatteryHolder_10257 | H1 |
| 1 | ICS-41351 MEMS-Microphone_ICS-41351 | MEMS-Mikrofon_ICS41351 | MK1 |
| 1 | JS102011SAQN | C-K_Switch_JS102011SAQN | S1 |
| 8 | XZCM2CRK53WA-8VF LED_XZCM2CRK53WA-8VF | LEDM168X110N | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 6 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C6, C7, C8 |
| 2 | 0.47uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4 |
| 2 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 9 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R5, R6, R7, R8, R9, R10 +1 |
| 2 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
Schalldruckpegelmessgerät design files
The KiCad project lives in the Froster2406/BAT2024 repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware/BAT2024.kicad_pcb
- SchematicHardware/BAT2024.kicad_sch
Schalldruckpegelmessgerät: common questions
What microcontroller does the Schalldruckpegelmessgerät use?
The Schalldruckpegelmessgerät is built around the BGM220PC22WGA2R, from the Silicon Labs family.
How big is the Schalldruckpegelmessgerät PCB?
The Schalldruckpegelmessgerät measures 60 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Schalldruckpegelmessgerät?
41 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Schalldruckpegelmessgerät design files?
From the Froster2406/BAT2024 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Schalldruckpegelmessgerät design in my own project?
The repository has no license, so all rights stay with Froster2406. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Schalldruckpegelmessgerät without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Silicon Labs firmware against it before you order a PCB.
More boards in BAT2024
Similar boards
Silicon Labs
Tomu hardware
im-tomu
13 × 9.4 mm11 parts2LCC-BY-SA-4.0365Silicon Labs
One key
ahtn
14.5 × 14.5 mm10 parts2LNo license96Silicon Labs
2key
ahtn
36.5 × 17.5 mm7 parts2LNo license96Silicon Labs
Ble soil moisture sensor
Miceuz
170 × 18 mm33 parts2LApache-2.033Silicon Labs
Ble soil moisture sensor pannel
Miceuz
170 × 36 mm29 parts2LApache-2.033Silicon Labs
Ym2413 dev
andete
115 × 45 mm146 parts2LNo license25