Robotrace
fTomo-robot·Robotrace·Robotrace/Robotrace.kicad_pcb
About the Robotrace PCB
Robotrace is an open source STM32 PCB design by fTomo-robot, published on GitHub. It is a 6-layer board measuring 50 × 35 mm, with 110 components from 44 distinct parts.
Its main chip is the STM32F469VGTX, from the STM32 family. Other key parts include the NJW1933F1-AT-TE2, MIC4606-2YML-TR, TLV70233_SOT23-5 and ICM-42688-P. By type, the board carries 41 capacitors, 19 resistors, 12 connectors, 11 transistors, 11 diodes and 6 ICs.
It belongs with the robotics & motion designs in this gallery.
Main components on the Robotrace
Robotrace bill of materials (BOM)
110 components, 44 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NJW1933F1-AT-TE2 | SOT-23-6 | IC1 |
| 2 | MIC4606-2YML-TR | QFN65P400X400X90-17N-D | IC2, IC3 |
| 1 | STM32F469VGTX STM32F469VGTx | LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | TLV70233_SOT23-5 | SOT-23-5 | U2 |
| 1 | ICM-42688-P | PQFN50P300X250X97-14N | U3 |
| 1 | BSS138 | SOT-23 | Q1 |
| 9 | Q_NMOS_SSSGD_AvalancheRated | Vishay_PowerPAK_1212-8_Single | Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 +1 |
| 1 | SISS27DN SiSS27DN | Vishay_PowerPAK_1212-8_Single | Q10 |
| 1 | 12MHZ 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | LINE | CON_5051101892_MOL | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J2 |
| 1 | Side_R | JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J3 |
| 1 | Side_L | JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J4 |
| 1 | STDC14 | PinHeader_2x07_P1.27mm_Vertical_SMD | J5 |
| 2 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P1.27mm_Vertical | J6, J7 |
| 1 | VIN | AMASS_XT30U-F_1x02_P5.0mm_Vertical | J8 |
| 4 | CONN_01X01_PIN Conn_01x01_Pin | ViaPad_D2.0mm_Drill1.0mm | J9, J10, J11, J12 |
| 1 | Buzzer | Buzzer_Murata_PKMCS0909E | BZ1 |
| 1 | SW1 | SW_SKRPACE010 | S1 |
| 1 | BOOT0 | SW_SKRPACE010 | S2 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RESET | SW_SKRPACE010 | S3 |
| 1 | SW2 | SW_SKRPACE010 | S4 |
| 1 | SSSS213202 | SSSS213202 | S5 |
| 3 | 40V1A | D_SOD-123F | D1, D10, D11 |
| 1 | LED_1 | LED_0603_1608Metric | D2 |
| 4 | WS2812B | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D3, D6, D8, D9 |
| 1 | LED_2 | LED_0603_1608Metric | D4 |
| 1 | LED_3 | LED_0603_1608Metric | D5 |
| 1 | LED_4 | LED_0603_1608Metric | D7 |
| 2 | FerriteBead | C_0603_1608Metric | FB1, FB2 |
| 1 | 22UH 22uH | L_Taiyo-Yuden_MD-4040 | L1 |
| 21 | 0.1U 0.1u | C_0402_1005Metric | C1, C5, C7, C9, C10, C11, C12, C13 +13 |
| 2 | 15PF 15pF | C_0402_1005Metric | C2, C4 |
| 6 | 2.2U 2.2u | C_0603_1608Metric | C3, C6, C8, C34, C36, C39 |
| 1 | 4.7 | C_0603_1608Metric | C19 |
| 1 | 330U 330u | CP_Elec_8x6.9 | C26 |
| 5 | 10U 10u | C_0603_1608Metric | C28, C29, C30, C31, C32 |
| 1 | 10N 10n | C_0402_1005Metric | C35 |
| 4 | 1u | C_0603_1608Metric | C37, C38, C40, C41 |
| 14 | 10K 10k | R_0402_1005Metric | R1, R2, R3, R4, R7, R8, R9, R10 +6 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R5, R6 |
| 1 | 33K 33k | R_0402_1005Metric | R12 |
| 1 | 39K 39k | R_0402_1005Metric | R14 |
| 1 | 12K 12k | R_0402_1005Metric | R15 |
Robotrace design files
The KiCad project lives in the fTomo-robot/Robotrace repository on GitHub; these links point at the commit this page was built from.
Robotrace: common questions
What microcontroller does the Robotrace use?
The Robotrace is built around the STM32F469VGTX, from the STM32 family.
How big is the Robotrace PCB?
The Robotrace measures 50 × 35 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Robotrace?
110 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Robotrace design files?
From the fTomo-robot/Robotrace repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Robotrace design in my own project?
The repository has no license, so all rights stay with fTomo-robot. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Robotrace without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Robotrace
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k