6 open source boards using the TLV70233_SOT23-5
Real designs built with the TLV70233_SOT23-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32MMDVM HS Hat
mathisschmieder
65.1 × 30.2 mm79 parts4LNo license200
STM32Steamvan
jmdaly
243.4 × 76.7 mm187 parts2LCC-BY-SA-4.077
STM32CO60
285 × 95.1 mm285 parts2LCC-BY-SA-4.054
Microchip SAMMechaduino-Hardware
IDMIL
43 × 43 mm61 parts2LNo license3
STM32Stm32-flight controller
bachaaymene
59 × 59 mm58 parts4LNo license0
ESP32Athenaeum
AdityaJainDXB
130 × 80 mm28 parts2LMIT0
The TLV70233_SOT23-5 in open source designs
The gallery holds 6 open source boards using the TLV70233_SOT23-5 from 6 GitHub repositories; a typical one measures about 97.5 × 67.8 mm and carries around 70 components.
67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is MMDVM HS Hat by mathisschmieder.
Parts used alongside the TLV70233_SOT23-5
Microcontrollers on boards using the TLV70233_SOT23-5
What boards using the TLV70233_SOT23-5 are built for
TLV70233_SOT23-5: common questions
Where can I find a TLV70233_SOT23-5 reference design?
Each of the 6 boards on this page is a real design using the TLV70233_SOT23-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TLV70233_SOT23-5?
The 74LVC1G34, NUF2221W1T2G and STM32F303CBTx appear in the most repositories here.
Which microcontrollers do boards using the TLV70233_SOT23-5 use?
Most are built on STM32 (4), ESP32 (1) and Microchip SAM (1).
How big is a typical board using the TLV70233_SOT23-5?
The median is 97.5 × 67.8 mm, and 67% are two-layer designs.
What is the most popular open source board using the TLV70233_SOT23-5?
By GitHub stars, MMDVM HS Hat by mathisschmieder, with 200 stars.
Can I simulate one of these boards using the TLV70233_SOT23-5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.