HardLabs

Ch10-design blocks

futureshocked·KLP-5e-Vol2-Projects·ch10-design-blocks/ch10-design-blocks.kicad_pcb

Ch10-design blocks PCB layout, top view — open source board by futureshocked

About the Ch10-design blocks PCB

Ch10-design blocks is an open source PCB design by futureshocked, published on GitHub under the MIT license. It is a 2-layer board measuring 16.6 × 22 mm, with 17 components from 11 distinct parts.

By type, the board carries 8 resistors, 4 transistors, 4 diodes and 1 connector.

It belongs with the robotics & motion and displays & leds designs in this gallery.

From the project

KiCad Like a Pro, 5th Edition, Volume 2: finished KiCad projects and saved stages (custom parts, LED matrix, DRV8833 motor drivers)

These are the KiCad projects from Volume 2, Real Boards: Custom Parts, Setup, and Manufacturing, part of KiCad Like a Pro, 5th Edition by Peter Dalmaris. Volume 2 builds one warm-up board, one capstone board and one extension, and teaches the skills around them: custom symbols and footprints, board setup, copper zones, bills of materials, and design for manufacturing. This repository holds the finished project for each chapter, plus the saved stages the chapters were captured from, so you can open a working design, compare it against your own, or pick up from the stage where you got stuck.

Ch10-design blocks bill of materials (BOM)

17 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SUD45P03-09-GE3
MMBT3904
Vishay
Q1
3
MMBT3904
Q2, Q3, Q4
1
1715721
Conn_01x06
Phoenix Contact
J1
1
150080GS75000
LED
Würth Elektronik
D1
3
LED
D2, D3, D4
1
RC0603FR-0710KL
1 kOhm
Yageo
R1
2
CSR1206FKR200
330 Ohm
Stackpole Electronics
R2, R6
2
CSR1206FKR200
1 kOhm
Stackpole Electronics
R3, R7
1
RC0603FR-07100KL
330 Ohm
Yageo
R4
1
RC0603FR-071KL
1 kOhm
Yageo
R5
1
330 Ohm
R8

Ch10-design blocks design files

The KiCad project lives in the futureshocked/KLP-5e-Vol2-Projects repository on GitHub; these links point at the commit this page was built from.

Ch10-design blocks: common questions

How big is the Ch10-design blocks PCB?

The Ch10-design blocks measures 16.6 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ch10-design blocks?

17 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ch10-design blocks design files?

From the futureshocked/KLP-5e-Vol2-Projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ch10-design blocks design in my own project?

Yes, under the terms of its MIT license, which futureshocked chose for the repository.

More boards in KLP-5e-Vol2-Projects

Similar boards