Pressure module
FYNCH-BIO·hardware·Accessories/pressure_module/pressure_module.kicad_pcb
About the Pressure module
Pressure module is an open source PCB design by FYNCH-BIO, published on GitHub. It is a 4-layer board measuring 203.2 × 101.6 mm, with 39 components from 14 distinct parts.
Other key parts include the HSC_S. By type, the board carries 27 connectors and 8 ICs.
From the project
eVOLVER Hardware (PCB, 3D printed parts)
For more information on the platform, check out our Nature Biotech publication.
For information on building, troubleshooting, and running experiments on the platform, reach out to us on the eVOLVER forum and read the wiki.
Main components on the Pressure module
Pressure module bill of materials (BOM)
39 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | CONN_02X12 HSC_S | HSC_SIP | U1, U2, U4 |
| 5 | HSC_S | HSC_SIP | U5, U6, U7, U8, U9 |
| 12 | CONN_02X08 CONN_01X02 | conn_2x1_molex | P1, P2, P3, P4, P6, P7, P8, P9 +4 |
| 1 | CONN_02X08 CONN_02X09 | 2x_9_pin_10in | P5 |
| 2 | CONN_02X08 RJ14 | RJ14 | P10, P11 |
| 1 | CONN_02X08 CONN_02X25 | 50_pin_10in | P12 |
| 4 | CONN_01X02 | conn_2x1_molex | P17, P18, P19, P20 |
| 1 | CONN_02X12 | 24_pin_10in | P21 |
| 1 | CONN_01X03 | 2.1mm_DC_Jack | P22 |
| 1 | CONN_01X02 | molex_2x1_0386307802 | P23 |
| 1 | CONN_02X25 | 50_pin_10in | P24 |
| 2 | CONN_01X10 | 10pin_tenth_in | P25, P26 |
| 1 | CONN_01X02 | screw_terminal | P27 |
| 4 | MountingHole | mh_632 | H1, H2, H3, H4 |
Pressure module design files
The KiCad project lives in the FYNCH-BIO/hardware repository on GitHub; these links point at the commit this page was built from.
Pressure module: common questions
How big is the Pressure module?
The Pressure module measures 203.2 × 101.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pressure module?
39 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pressure module design files?
From the FYNCH-BIO/hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Pressure module design in my own project?
The repository has no license, so all rights stay with FYNCH-BIO. Use it as a reference, and ask the author before reusing the design.
More boards in hardware
Motherboard
FYNCH-BIO
320 × 378.2 mm167 parts4LNo license12ADC
FYNCH-BIO
33 × 66 mm98 parts4LNo license12Min evolver
FYNCH-BIO
109.2 × 64.5 mm68 parts4LNo license12EVolver pwm
FYNCH-BIO
33 × 66 mm66 parts4LNo license12Auxiliary Board
FYNCH-BIO
266.7 × 123.2 mm36 parts4LNo license12AVR/Arduino
Tboard2
FYNCH-BIO
92.7 × 82.6 mm28 parts2LNo license12Raspberry Pi
Pi-Hat
FYNCH-BIO
65 × 56 mm28 parts2LNo license12AVR/Arduino
Temperature board
FYNCH-BIO
92.7 × 82.6 mm28 parts2LNo license12RS485
FYNCH-BIO
33 × 22.9 mm18 parts4LNo license12Resistor pack
FYNCH-BIO
7.7 × 26.6 mm9 parts2LNo license12Pump board
FYNCH-BIO
109.2 × 139.7 mm7 parts2LNo license12