Tboard2
FYNCH-BIO·hardware·Accessories/temp-cal/tboard2.kicad_pcb
About the Tboard2 PCB
Tboard2 is an open source AVR/Arduino PCB design by FYNCH-BIO, published on GitHub. It is a 2-layer board measuring 92.7 × 82.6 mm, with 28 components from 12 distinct parts.
Its main chip is the arduinoChip, from the AVR/Arduino family. Other key parts include the 9_R_01x10. By type, the board carries 22 connectors, 4 capacitors and 2 ICs.
It belongs with the sensors designs in this gallery.
From the project
eVOLVER Hardware (PCB, 3D printed parts)
For more information on the platform, check out our Nature Biotech publication.
For information on building, troubleshooting, and running experiments on the platform, reach out to us on the eVOLVER forum and read the wiki.
Main components on the Tboard2
Tboard2 bill of materials (BOM)
28 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CONN_02X12 9_R_01x10 | resistorPackx10 | U1, U2 |
| 1 | Barrel_Jack | barreljack | J1 |
| 13 | Conn_01x02 | JSTHeader | J2, J3, J5, J6, J9, J12, J13, J14 +5 |
| 1 | CONN_02X03 Conn_01x02 | JSTHeader | J4 |
| 2 | RJ14 Conn_01x02 | JSTHeader | J7, J8 |
| 1 | Connector_Generic_Conn_02x25_Row_Letter_Last | ADCBoard | J10 |
| 1 | Conn_01x04 | ethernet cable jack | J11 |
| 1 | Conn_02x12_Counter_Clockwise | arduinoChip | J20 |
| 1 | Conn_02x09_Odd_Even | RS485 | J21 |
| 1 | DualDSub | dualDSub9Connector | J22 |
| 3 | 1UF C | C_Radial_D4.0mm_H5.0mm_P1.50mm | C1, C3, C4 |
| 1 | 1UF 1uF | C_Radial_D4.0mm_H5.0mm_P1.50mm | C2 |
Tboard2 design files
The KiCad project lives in the FYNCH-BIO/hardware repository on GitHub; these links point at the commit this page was built from.
Tboard2: common questions
What microcontroller does the Tboard2 use?
The Tboard2 is built around the arduinoChip, from the AVR/Arduino family.
How big is the Tboard2 PCB?
The Tboard2 measures 92.7 × 82.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tboard2?
28 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tboard2 design files?
From the FYNCH-BIO/hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Tboard2 design in my own project?
The repository has no license, so all rights stay with FYNCH-BIO. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tboard2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in hardware
Motherboard
FYNCH-BIO
320 × 378.2 mm167 parts4LNo license12ADC
FYNCH-BIO
33 × 66 mm98 parts4LNo license12Min evolver
FYNCH-BIO
109.2 × 64.5 mm68 parts4LNo license12EVolver pwm
FYNCH-BIO
33 × 66 mm66 parts4LNo license12Pressure module
FYNCH-BIO
203.2 × 101.6 mm39 parts4LNo license12Auxiliary Board
FYNCH-BIO
266.7 × 123.2 mm36 parts4LNo license12Raspberry Pi
Pi-Hat
FYNCH-BIO
65 × 56 mm28 parts2LNo license12AVR/Arduino
Temperature board
FYNCH-BIO
92.7 × 82.6 mm28 parts2LNo license12RS485
FYNCH-BIO
33 × 22.9 mm18 parts4LNo license12Resistor pack
FYNCH-BIO
7.7 × 26.6 mm9 parts2LNo license12Pump board
FYNCH-BIO
109.2 × 139.7 mm7 parts2LNo license12
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k