RegA
G-Leonel-6·C2·placa/Grupo3_Reg_A/Grupo3_Reg_A/Grupo3_Reg_A/RegA.kicad_pcb
About the RegA PCB
RegA is an open source PCB design by G-Leonel-6, published on GitHub. It is a 2-layer board measuring 100 × 80 mm, with 50 components from 31 distinct parts.
By type, the board carries 27 resistors, 9 transistors, 5 connectors, 3 capacitors and 1 switch.
From the project
En este repositorio se guardaran los archivos correspondientes al desarrollo de una fuente de alimentacion regulada
RegA bill of materials (BOM)
50 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BC847BPN | SOT-363_SC-70-6 | Q1 |
| 2 | 2N2222 | TO-92 | Q3, Q4 |
| 2 | BC547 | TO-92_Inline | Q5, Q6 |
| 1 | TIP42C | TO-220-3_Vertical | Q7 |
| 2 | BC557C | TO-92 | Q8, Q9 |
| 1 | BS170 | TO-92 | Q10 |
| 1 | Conn_02x07_Counter_Clockwise_MountingPin | DIP-14_W7.62mm | J1 |
| 1 | OP295 | DIP-8_W7.62mm | J2 |
| 3 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J3, J4, J5 |
| 1 | R | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | RL1 |
| 1 | 0,1K | R_Axial_Power_L20.0mm_W6.4mm_P25.40mm | Rs1 |
| 1 | SW_DIP_x01 | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | SW1 |
| 1 | 1,2 | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | V1 |
| 1 | 6.35 | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | V2 |
| 1 | 6 | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | V3 |
| 1 | 1n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 22n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 120n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 3 | 100 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | 3,3K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 2,2K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7, R8, R11, R20, R200 |
| 2 | 22K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9, R10 |
| 1 | 910 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12 |
| 2 | 1,1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R13, R27 |
| 5 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R14, R15, R16, R24, R28 |
| 1 | 11k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R17 |
| 2 | 820 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R18, R25 |
| 2 | 82K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R19, R21 |
| 1 | 75 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R23 |
| 1 | 2,4k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R26 |
| 1 | 20k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R30 |
RegA design files
The KiCad project lives in the G-Leonel-6/C2 repository on GitHub; these links point at the commit this page was built from.
RegA: common questions
How big is the RegA PCB?
The RegA measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RegA?
50 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the RegA design files?
From the G-Leonel-6/C2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RegA design in my own project?
The repository has no license, so all rights stay with G-Leonel-6. Use it as a reference, and ask the author before reusing the design.