Buck
G-Leonel-6·C2·PCB Impresion/check4/buck/buck.kicad_pcb
About the Buck PCB
Buck is an open source PCB design by G-Leonel-6, published on GitHub. It is a 2-layer board measuring 78.5 × 46.5 mm, with 14 components from 12 distinct parts.
Other key parts include the IR2104. By type, the board carries 4 connectors, 3 capacitors, 2 transistors, 2 resistors, 1 IC and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
En este repositorio se guardaran los archivos correspondientes al desarrollo de una fuente de alimentacion regulada
Main components on the Buck
Buck bill of materials (BOM)
14 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IR2104 | CERDIP-8_W7.62mm_SideBrazed_LongPads_Socket | U1 |
| 2 | IRF3205 | TO-220-3_Vertical | Q1, Q2 |
| 1 | V | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | VCC | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | VIN | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | OUT | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 200u | L_Toroid_Vertical_L16.5mm_W11.4mm_P7.62mm_Pulse_KM-2 | L1 |
| 1 | 2.7u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 22u | CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 10u | CP_Radial_D6.3mm_P2.50mm | C3 |
| 2 | 10 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
Buck design files
The KiCad project lives in the G-Leonel-6/C2 repository on GitHub; these links point at the commit this page was built from.
Buck: common questions
How big is the Buck PCB?
The Buck measures 78.5 × 46.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Buck?
14 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Buck design files?
From the G-Leonel-6/C2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Buck design in my own project?
The repository has no license, so all rights stay with G-Leonel-6. Use it as a reference, and ask the author before reusing the design.
More boards in C2
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k