RegB
G-Leonel-6·C2·PCB Impresion/Grupo3_Reg_B_V2/Grupo3_Reg_B/RegB.kicad_pcb
About the RegB PCB
RegB is an open source PCB design by G-Leonel-6, published on GitHub. It is a 2-layer board measuring 100 × 80 mm, with 57 components from 37 distinct parts.
By type, the board carries 29 resistors, 9 transistors, 8 capacitors, 5 connectors and 1 switch.
From the project
En este repositorio se guardaran los archivos correspondientes al desarrollo de una fuente de alimentacion regulada
RegB bill of materials (BOM)
57 components, 37 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BC847BPN | TSOP-6_1.65x3.05mm_P0.95mm | Q1 |
| 2 | 2N2222 | TO-92 | Q3, Q4 |
| 2 | BC547 | TO-92_Inline | Q5, Q6 |
| 1 | TIP42C | TO-220-3_Vertical | Q7 |
| 2 | BC557C | TO-92 | Q8, Q9 |
| 1 | BS170 | TO-92 | Q10 |
| 1 | Conn_02x07_Counter_Clockwise_MountingPin | DIP-14_W7.62mm | J1 |
| 1 | OP295 | DIP-8_W7.62mm | J2 |
| 3 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J3, J4, J5 |
| 1 | R | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | RL1 |
| 1 | 0,1K | R_Axial_Power_L20.0mm_W6.4mm_P25.40mm | Rs1 |
| 1 | SW_DIP_x01 | Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | SW1 |
| 1 | 1,2 | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | V1 |
| 1 | 6.35 | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | V2 |
| 1 | 6 | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | V3 |
| 2 | 10u | CP_Radial_D5.0mm_P2.00mm | C1, C6 |
| 3 | 10n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C7, C8 |
| 1 | 1n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 22n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 120n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 100 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | 20 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4 |
| 1 | 3,6K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
| 5 | 2,2k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6, R7, R8, R11, R200 |
| 2 | 22K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9, R10 |
| 1 | 910 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R12 |
| 1 | 1,1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R13 |
| 3 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R14, R16, R24 |
| 2 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15, R28 |
| 1 | 11k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R17 |
| 2 | 820 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R18, R25 |
| 2 | 82K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R19, R21 |
| 1 | 2,2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20 |
| 1 | 75 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R23 |
| 1 | 2,7k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R26 |
| 1 | 1,2K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R27 |
| 1 | 20k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R30 |
RegB design files
The KiCad project lives in the G-Leonel-6/C2 repository on GitHub; these links point at the commit this page was built from.
RegB: common questions
How big is the RegB PCB?
The RegB measures 100 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RegB?
57 components, from 37 distinct parts. The full bill of materials is listed on this page.
Where can I download the RegB design files?
From the G-Leonel-6/C2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RegB design in my own project?
The repository has no license, so all rights stay with G-Leonel-6. Use it as a reference, and ask the author before reusing the design.