Perdican
Gabouin·perdican·src/kicad/pcb/Perdican V1.kicad_pcb
About the Perdican PCB
Perdican is an open source STM32 PCB design by Gabouin, published on GitHub under the MIT license. It is a 2-layer board measuring 37.1 × 39.5 mm, with 35 components from 15 distinct parts.
Its main chip is the STM32G431CBT6, from the STM32 family. Other key parts include the XC6206PXXXMR. By type, the board carries 14 capacitors, 11 resistors, 3 LEDs, 2 connectors and 1 IC.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
A shipped, polished and polyvalent 4cm long IMU-equipped STM32 devboard with cool renders
PERDICAN is a STM32 based devboard designed with an integrated IMU, GPIO pins, buttons and LEDs
- STM32G431CBT6 MCU 32-Bit 170MHz 128KB (128K x 8) FLASH 48-LQFP (7x7) - LSM6DS3TR-C 6 axis IMU with Accelerometer, Gyroscope, Temperature - 14 GPIO pins to help make any hardware project - 4 debugging pins with SWCLK, SWDIO, GND and 3V3 - Status LEDs to see any error from 5V or 3V3 - GPIO linked LED to program it without needing an external LED - GPIO linked button to use it without needing an external button - BOOT and RESET buttons - USB-C input - pixelated silkscreen art to improve the overall…
Main components on the Perdican
Perdican bill of materials (BOM)
35 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC6206PXXXMR XC6206PxxxMR | SOT-23-3 | U1 |
| 1 | C18213723 Header Left | PinHeader_1x09_P2.54mm_Vertical | J1 |
| 1 | C18213723 Header Right | PinHeader_1x09_P2.54mm_Vertical | J2 |
| 1 | LSM6DS3TR-C ST(意法半导体) | LGA-14_L3.0-W2.5-P0.50-TL | IMU1 |
| 1 | PA2 | SW-SMD_L3.9-W3.0-P4.45 | PA2 |
| 1 | STM32G431CBT6 ST(意法半导体) | LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL | STM32 |
| 1 | TYPE-C 16PIN 2MD(073) TYPE-C 16PIN 2MD SHOU HAN(首韩) | USB-C-SMD_TYPE-C-16PIN-2MD-073 | USB-C1 |
| 3 | LED | LED_0603_1608Metric | 3V3, 5V, PA3 |
| 5 | 1UF 1uF | C_0603_1608Metric | C1, C2, C7, C8, C11 |
| 8 | 100NF 100nF | C_0603_1608Metric | C3, C4, C5, C6, C9, C10, C13, C14 |
| 1 | 10NF 10nF | C_0603_1608Metric | C12 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
| 5 | 10K 10k | R_0603_1608Metric | R3, R8, R9, R10, R11 |
| 2 | 100K 100k | R_0603_1608Metric | R4, R5 |
| 2 | 4.7K 4.7k | R_0603_1608Metric | R6, R7 |
Perdican design files
The KiCad project lives in the Gabouin/perdican repository on GitHub; these links point at the commit this page was built from.
Perdican: common questions
What microcontroller does the Perdican use?
The Perdican is built around the STM32G431CBT6, from the STM32 family.
How big is the Perdican PCB?
The Perdican measures 37.1 × 39.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Perdican?
35 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Perdican design files?
From the Gabouin/perdican repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Perdican design in my own project?
Yes, under the terms of its MIT license, which Gabouin chose for the repository.
Can I test firmware for the Perdican without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k