HardLabs

PSM60 Fader Controller

GadgetReboot·PSM60_Fader_Controller·KiCad/GR_Slide_Pot_Controller.kicad_pcb

PSM60 Fader Controller PCB layout, top view — open source AVR/Arduino board by GadgetReboot

About the PSM60 Fader Controller PCB

PSM60 Fader Controller is an open source AVR/Arduino PCB design by GadgetReboot, published on GitHub. It is a 2-layer board measuring 90.5 × 27.7 mm, with 37 components from 14 distinct parts.

Its main chip is the ATtiny804-SS, from the AVR/Arduino family. Other key parts include the L293DD. By type, the board carries 22 resistors, 7 capacitors, 6 connectors and 2 ICs.

From the project

Motorized fader pot controller

Main components on the PSM60 Fader Controller

ATtiny804-SSL293DD

PSM60 Fader Controller bill of materials (BOM)

37 components, 14 distinct parts.

QtyPartRefs
1
ATtiny804-SS
U3
1
L293DD
U4
1
Conn_01x03
J1
2
Conn_01x02
J5, J9
1
Conn_01x03
J6
2
Conn_01x04
J7, J8
3
100nF
C1, C2, C5
1
1uF
C3
2
10uF 16v
C4, C6
1
10nF
C7
19
0r
R1, R2, R4, R5, R6, R8, R9, R10 +11
1
1K
R3
1
PSM60-081A-103B2
R7
1
10K
R12

PSM60 Fader Controller design files

The KiCad project lives in the GadgetReboot/PSM60_Fader_Controller repository on GitHub; these links point at the commit this page was built from.

PSM60 Fader Controller: common questions

What microcontroller does the PSM60 Fader Controller use?

The PSM60 Fader Controller is built around the ATtiny804-SS, from the AVR/Arduino family.

How big is the PSM60 Fader Controller PCB?

The PSM60 Fader Controller measures 90.5 × 27.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PSM60 Fader Controller?

37 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the PSM60 Fader Controller design files?

From the GadgetReboot/PSM60_Fader_Controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the PSM60 Fader Controller design in my own project?

The repository has no license, so all rights stay with GadgetReboot. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PSM60 Fader Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards