PD243X-I2C-Adapter
galjonsfigur·PD243X-I2C-Adapter
About the PD243X-I2C-Adapter PCB
PD243X-I2C-Adapter is an open source PCB design by galjonsfigur, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 42.5 × 20.1 mm, with 11 components from 8 distinct parts.
Other key parts include the PCF8574 and PD2435. By type, the board carries 4 resistors, 3 ICs, 2 diodes, 1 connector and 1 capacitor.
It belongs with the displays & leds designs in this gallery.
From the project
Design files for PD243X I²C Display Adapter Board
This repository contains KiCad design files, schematics and gerber files for a simple adapter board that allows to use old PD2435, PD2436 and PD2437 dot-matrix displays with most microcontrollers using I²C protocol instead of pin-consuming parallel interface. They can be used as neat little displays for any project that requires some kind of simple and old-looking display.

Main components on the PD243X-I2C-Adapter
PD243X-I2C-Adapter bill of materials (BOM)
11 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | PCF8574 | SOIC-16W_7.5x10.3mm_P1.27mm | U1, U3 |
| 1 | PD2435 | DIP-20_W15.24mm_LongPads | U2 |
| 1 | Conn_01x04_Male | PinHeader_1x04_P2.54mm_Horizontal_cut | J1 |
| 1 | Green LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | Red LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 2 | 4.7K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 2 | 470 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4 |
PD243X-I2C-Adapter design files
The KiCad project lives in the galjonsfigur/PD243X-I2C-Adapter repository on GitHub; these links point at the commit this page was built from.
- LayoutPD243X Display.kicad_pcb
PD243X-I2C-Adapter: common questions
How big is the PD243X-I2C-Adapter PCB?
The PD243X-I2C-Adapter measures 42.5 × 20.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PD243X-I2C-Adapter?
11 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the PD243X-I2C-Adapter design files?
From the galjonsfigur/PD243X-I2C-Adapter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PD243X-I2C-Adapter design in my own project?
Yes, under the terms of its Apache-2.0 license, which galjonsfigur chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k