POE INJECTOR SLIM
About the POE INJECTOR SLIM PCB
POE INJECTOR SLIM is an open source PCB design by galopago, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 20 × 72 mm, with 6 components from 5 distinct parts.
By type, the board carries 3 connectors, 1 fuse, 1 diode and 1 resistor.
From the project
Collection of electronic circuits for DIN RAIL mount
POE INJECTOR SLIM bill of materials (BOM)
6 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RJ45 | RJ45_OST_PJ012-8P8CX_Vertical | J1, J2 |
| 1 | Conn_01x02_Female | TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J3 |
| 1 | Polyfuse_Small | C_Disc_D4.3mm_W1.9mm_P5.00mm | F1 |
| 1 | LED_Small | LED_D3.0mm | D1 |
| 1 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1 |
POE INJECTOR SLIM design files
The KiCad project lives in the galopago/din-rail-circuits repository on GitHub; these links point at the commit this page was built from.
POE INJECTOR SLIM: common questions
How big is the POE INJECTOR SLIM PCB?
The POE INJECTOR SLIM measures 20 × 72 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the POE INJECTOR SLIM?
6 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the POE INJECTOR SLIM design files?
From the galopago/din-rail-circuits repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the POE INJECTOR SLIM design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which galopago chose for the repository.
More boards in din-rail-circuits
ESP32Modbus RTU mirror side board
52 × 40 mm38 parts2LCC-BY-4.07
Modbus RTU mirror base board
82 × 31 mm25 parts2LCC-BY-4.07
INRUSH CURRENT LIMITER
72 × 20 mm7 parts2LCC-BY-4.07
DIN RAIL POE INJECTOR
37.9 × 45 mm6 parts2LCC-BY-4.07
DIN RAIL POE INJECTOR SLIM
20 × 72 mm6 parts2LCC-BY-4.07