WarpSE
About the WarpSE PCB
WarpSE is an open source PCB design by garrettsworkshop, published on GitHub. It is a 4-layer board measuring 112.1 × 102.1 mm, with 140 components from 35 distinct parts.
Other key parts include the XC95144XL-TQ100, 74AHCT573PW, AZ1117CH-3.3TRG1, LM66100DCK and SIT2001. By type, the board carries 57 capacitors, 38 resistors, 29 ICs, 4 connectors, 3 transistors and 1 crystal.
From the project
WIP 25 MHz MC68HC000-based accelerator card for Macintosh SE
Main components on the WarpSE
WarpSE bill of materials (BOM)
140 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC95144XL-TQ100 | TQFP-100_14x14mm_P0.5mm | U1 |
| 12 | 74AHCT573PW | TSSOP-20_4.4x6.5mm_P0.65mm | U2, U13, U15, U16, U17, U18, U19, U20 +4 |
| 1 | AZ1117CH-3.3TRG1 | SOT-223 | U3 |
| 2 | LM66100DCK | SOT-363 | U4, U25 |
| 1 | SIT2001 SiT2001 | SOT-23-5 | U5 |
| 2 | 74LVC1G74DC | NXP_VSSOP-8_2.3x2mm | U6, U7 |
| 2 | KM48C2100 | SOJ-28_300mil | U8, U9 |
| 2 | 39SF040 | PLCC-32 | U10, U11 |
| 1 | CH340G | SOIC-16_3.9mm | U12 |
| 1 | MC68HC000FN20 | PLCC-68 | U14 |
| 3 | 74LVC1G32GW | SOT-353 | U26, U27, U28 |
| 1 | 74LVC1G125GW | SOT-353 | U30 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 1 | DNP | SOT-23 | Q2 |
| 1 | AO3401A | SOT-23 | Q3 |
| 1 | 12M | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | MacSEPDS | DIN41612_R_3x32_Male_Vertical_THT | J1 |
| 1 | JTAG | Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | J2 |
| 1 | microUSB | USB_Micro-B_Amphenol_10118192-0001 | J3 |
| 1 | DBG | PinSocket_2x06_P2.00mm_Vertical | J4 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 750M 750m | BelFuse_1206 | F1 |
| 5 | ~ | PasteHole_1.152mm_NPTH | H1, H2, H3, H4, H5 |
| 1 | 7V5 | D_SOD-323 | D1 |
| 1 | 220 | C_0805 | FB1 |
| 15 | 10U 10u | C_0805 | C1, C2, C3, C4, C7, C8, C9, C10 +7 |
| 39 | 2U2 2u2 | C_0603 | C5, C6, C11, C19, C20, C21, C22, C23 +31 |
| 3 | 22P 22p | C_0603 | C46, C47, C52 |
| 9 | 47 | R_0603 | R1, R2, R3, R5, R7, R17, R18, R19 +1 |
| 1 | 470 | R_0603 | R4 |
| 11 | DNP | R_0603 | R6, R12, R14, R15, R16, R21, R23, R24 +3 |
| 10 | 3K3 3k3 | R_0603 | R8, R10, R11, R31, R32, R33, R34, R37 +2 |
| 1 | 820 | R_0603 | R9 |
| 4 | 680 | R_0805 | R25, R26, R27, R40 |
| 1 | DNP | R_0805 | R28 |
| 1 | 22K 22k | R_0805 | R29 |
WarpSE design files
The KiCad project lives in the garrettsworkshop/WarpSE repository on GitHub; these links point at the commit this page was built from.
- LayoutWarpSE.kicad_pcb
- SchematicWarpSE.kicad_sch
- BOMgerber/WarpSE-BOM.csv
WarpSE: common questions
How big is the WarpSE PCB?
The WarpSE measures 112.1 × 102.1 mm, has 4 copper layers and is 1.6108 mm thick.
How many components are on the WarpSE?
140 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the WarpSE design files?
From the garrettsworkshop/WarpSE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the WarpSE design in my own project?
The repository has no license, so all rights stay with garrettsworkshop. Use it as a reference, and ask the author before reusing the design.