10 open source boards using the XC95144XL-TQ100

Real designs built with the XC95144XL-TQ100, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the XC95144XL-TQ100

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the XC95144XL-TQ100 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCINT pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 2.2 µF).
  • The VCCIO pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 2.2 µF).
VCCINTpin 5, 57, 98Connected to: 3.3V 100%
  • Decoupling capacitor on 90% · 100 nF (35), 2.2 µF (6), 10 µF (2)
P20pin 20Connected to: A connector 30% · not connected 20%
  • Series resistor on 30%
GNDpin 21, 31, 44, 62, 69, 75, 84, 100Connected to: GND 100%
I/O/GCK1pin 22Connected to: A connector 30%
  • Series resistor on 30% · 47 Ω (1)
VCCIOpin 26, 38, 51, 88Connected to: 3.3V 100%
  • Decoupling capacitor on 90% · 100 nF (40), 2.2 µF (6)
I/O/GCK3pin 27Connected to: A connector 20%
  • Series resistor on 30% · 33 Ω (2), 47 Ω (1)
TMSpin 47Connected to: A connector 80%
  • Pull-up to 3.3V on 30% · 10 kΩ (2)
TCKpin 48Connected to: A connector 70%
  • Resistor to GND on 30% · 4.7 kΩ (2)
P52pin 52Connected to: A connector 20%
  • Series resistor on 30% · 1 kΩ (2), 33 Ω (1)

79 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Finalgrom99 by endlos99, Tipi peb by jedimatt42, GottaGoFaZt3r by LIV2 and AudioYM2151 by ddraig68k.

The XC95144XL-TQ100 in open source designs

The gallery holds 10 open source boards using the XC95144XL-TQ100 from 10 GitHub repositories; a typical one measures about 100 × 56.8 mm and carries around 51 components.

50% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Finalgrom99 by endlos99.

Parts used alongside the XC95144XL-TQ100

Microcontrollers on boards using the XC95144XL-TQ100

What boards using the XC95144XL-TQ100 are built for

XC95144XL-TQ100: common questions

Where can I find a XC95144XL-TQ100 reference design?

Each of the 10 boards on this page is a real design using the XC95144XL-TQ100. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the XC95144XL-TQ100 VCCINT pin?

The VCCINT pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 10 open source designs using the XC95144XL-TQ100.

What decoupling capacitors do designs use on the XC95144XL-TQ100 VCCIO pin?

The VCCIO pins have a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 10 open source designs using the XC95144XL-TQ100.

What parts are used alongside the XC95144XL-TQ100?

The 74HCT245, LM1117-3.3, 27C256, 74LVC245 and SST39SF010 appear in the most repositories here.

Which microcontrollers do boards using the XC95144XL-TQ100 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the XC95144XL-TQ100?

The median is 100 × 56.8 mm, and 50% are two-layer designs.

What is the most popular open source board using the XC95144XL-TQ100?

By GitHub stars, Finalgrom99 by endlos99, with 94 stars.

Can I simulate one of these boards using the XC95144XL-TQ100 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part