Dehumidifier
gehel·electronics·dehumidifier/dehumidifier.kicad_pcb
About the Dehumidifier PCB
Dehumidifier is an open source PCB design by gehel, published on GitHub. It is a 2-layer board measuring 27.9 × 60.7 mm, with 26 components from 18 distinct parts.
Other key parts include the ACS712xLCTR-05B and LM78M05_TO220. By type, the board carries 8 connectors, 8 resistors, 4 capacitors, 2 ICs, 2 transistors and 2 diodes.
Main components on the Dehumidifier
Dehumidifier bill of materials (BOM)
26 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ACS712xLCTR-05B | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | LM78M05_TO220 | TO-220-3_Vertical | U5 |
| 1 | 2N3904 | TO-92_HandSolder | Q1 |
| 1 | Q_NMOS_GDS | TO-220-3_Vertical | Q2 |
| 1 | Barrel_Jack_Switch | BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 2 | Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J2, J3 |
| 2 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J4, J7 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | J8 |
| 2 | LED | LED_D3.0mm | D1, D2 |
| 2 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 2 | C_Polarized | CP_Radial_D6.3mm_P2.50mm | C3, C4 |
| 1 | 1K5 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 3 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R7 |
| 2 | 4K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R8 |
| 1 | 470R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 2K7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
Dehumidifier design files
The KiCad project lives in the gehel/electronics repository on GitHub; these links point at the commit this page was built from.
Dehumidifier: common questions
How big is the Dehumidifier PCB?
The Dehumidifier measures 27.9 × 60.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dehumidifier?
26 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dehumidifier design files?
From the gehel/electronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Dehumidifier design in my own project?
The repository has no license, so all rights stay with gehel. Use it as a reference, and ask the author before reusing the design.