22 open source boards using the ACS712xLCTR-05B
Real designs built with the ACS712xLCTR-05B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ShunkoBot Shield
Phersax
87.5 × 100.5 mm37 parts2LCC-BY-NC-4.03RP2040/RP2350
Nyu openplc te
kiwih
155 × 108 mm153 parts2LGPL-3.02- schematic only · 27 partsESP32
Sata psu
majabojarska
27 partsMIT2 KIKAD
MUBARIS-KT
263.3 × 128 mm133 parts2LNo license0RP2040/RP2350
DIY T12 iron
anshchawla521
97 × 67 mm90 parts2LNo license0ESP32
Dew control
ncleesattel
130 × 120 mm77 parts2LGPL-3.00Omarich EPS stack V1.5
AfriOrbit
80.6 × 80.5 mm75 parts2LNo license0DRV8313 simplefoc
Enderscheng
105 × 35 mm63 parts4LNo license01U EPS Design
Patricknmaina
80.5 × 80.5 mm57 parts2LNo license0NXP
Hexapod
GreatMesa
100 × 95 mm36 parts4LNo license0ESP32
Garage
macdems
90 × 100 mm29 parts2LNo license0AVR/Arduino
Schematics
Akku-Craft
21.5 × 11.3 mm4 parts2LCC-BY-NC-4.00Copy
MUBARIS-KT
263.3 × 132.1 mm114 parts2LNo license0EPSV4
AfriOrbit
80.5 × 80.5 mm56 parts2LNo license02nd
Tobias66662
50 × 40 mm16 parts2LNo license0AVR/Arduino
Omarichet Sensor Shield 2
AfriOrbit
86.8 × 57.5 mm38 parts2LNo license0Dehumidifier
gehel
27.9 × 60.7 mm26 parts2LNo license0Omarichet Sensor Shield 1.2
AfriOrbit
100 × 100 mm33 parts2LNo license0Omarichet Sensor Board v1.5
AfriOrbit
80.6 × 80.5 mm18 parts2LNo license0Omarichet EPS Stack
AfriOrbit
85.3 × 87.8 mm17 parts2LNo license0Omarichet Sensor Shield 1.3
AfriOrbit
85.4 × 87.9 mm16 parts2LNo license0Sensor corrente
BhoumikAcharya
32.5 × 12 mm7 parts2LNo license1
How designs wire the ACS712xLCTR-05B
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the ACS712xLCTR-05B connects to, and the resistors, capacitors and other passives placed on it.
- The FILTER pin has a capacitor to GND on 12 of 14 designs, most often 1 nF (then 100 nF).
- The VCC pin has a decoupling capacitor on 7 of 14 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 5 | Connected to: GND 93% | — |
| FILTERpin 6 | Connected to: Signal 93% |
|
| VCCpin 8 | Connected to: 5V 93% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ShunkoBot Shield by Phersax, Nyu openplc te by kiwih, Sensor corrente by BhoumikAcharya and EPSV4 by AfriOrbit.
The ACS712xLCTR-05B in open source designs
The gallery holds 22 open source boards using the ACS712xLCTR-05B from 15 GitHub repositories; a typical one measures about 86.8 × 80.5 mm and carries around 37 components.
90% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is ShunkoBot Shield by Phersax.
Parts used alongside the ACS712xLCTR-05B
Microcontrollers on boards using the ACS712xLCTR-05B
What boards using the ACS712xLCTR-05B are built for
ACS712xLCTR-05B: common questions
Where can I find a ACS712xLCTR-05B reference design?
Each of the 22 boards on this page is a real design using the ACS712xLCTR-05B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ACS712xLCTR-05B FILTER pin connected?
The FILTER pin has a capacitor to GND on 12 of 14 designs, most often 1 nF (then 100 nF). Counted from the KiCad layouts of 14 open source designs using the ACS712xLCTR-05B.
What decoupling capacitors do designs use on the ACS712xLCTR-05B VCC pin?
The VCC pin has a decoupling capacitor on 7 of 14 designs, most often 100 nF. Counted from the KiCad layouts of 14 open source designs using the ACS712xLCTR-05B.
What parts are used alongside the ACS712xLCTR-05B?
The AMS1117-3.3, DW06D, ESP32-C3_SUPERMINI_TH, L7805 and LM358 appear in the most repositories here.
Which microcontrollers do boards using the ACS712xLCTR-05B use?
Most are built on ESP32 (3), AVR/Arduino (2), RP2040/RP2350 (2) and NXP (1).
How big is a typical board using the ACS712xLCTR-05B?
The median is 86.8 × 80.5 mm, and 90% are two-layer designs.
What is the most popular open source board using the ACS712xLCTR-05B?
By GitHub stars, ShunkoBot Shield by Phersax, with 3 stars.
Can I simulate one of these boards using the ACS712xLCTR-05B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.