6 open source boards using the LM78M05_TO220

Real designs built with the LM78M05_TO220, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the LM78M05_TO220

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LM78M05_TO220 connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 3 of 5 designs, most often 1 µF.
  • The VO pin has a decoupling capacitor on 2 of 5 designs.
VIpin 1Connected to: 12V 60% · a signal 40%
  • Decoupling capacitor on 60% · 1 µF (1)
GNDpin 2Connected to: GND 100%
VOpin 3Connected to: 5V 80% · a signal 20%
  • Decoupling capacitor on 40%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Atmega32 Robot by odobot, Dehumidifier by gehel, Breadboard power supply by JKpro-file and FilaBoss control PCB b by ronisillman.

The LM78M05_TO220 in open source designs

The gallery holds 6 open source boards using the LM78M05_TO220 from 5 GitHub repositories; a typical one measures about 75.2 × 55.8 mm and carries around 25 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Pcb1 by odobot.

Microcontrollers on boards using the LM78M05_TO220

What boards using the LM78M05_TO220 are built for

LM78M05_TO220: common questions

Where can I find a LM78M05_TO220 reference design?

Each of the 6 boards on this page is a real design using the LM78M05_TO220. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LM78M05_TO220 VI pin?

The VI pin has a decoupling capacitor on 3 of 5 designs, most often 1 µF. Counted from the KiCad layouts of 5 open source designs using the LM78M05_TO220.

What decoupling capacitors do designs use on the LM78M05_TO220 VO pin?

The VO pin has a decoupling capacitor on 2 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LM78M05_TO220.

Which microcontrollers do boards using the LM78M05_TO220 use?

Most are built on AVR/Arduino (3) and ESP32 (1).

How big is a typical board using the LM78M05_TO220?

The median is 75.2 × 55.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the LM78M05_TO220?

By GitHub stars, Pcb1 by odobot, with 1 stars.

Can I simulate one of these boards using the LM78M05_TO220 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part