BLUENRG1 Generic Bluetooth Board
About the BLUENRG1 Generic Bluetooth Board
BLUENRG1 Generic Bluetooth Board is an open source PCB design by GeneRAD, published on GitHub. It is a 2-layer board measuring 34.5 × 36.8 mm, with 67 components from 36 distinct parts.
Other key parts include the BlueNRG-1, LMT84DCK, MCP1640BCH and AT25xxx. By type, the board carries 27 capacitors, 18 resistors, 6 connectors, 6 inductors, 4 ICs and 2 crystals.
It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.
From the project
A bluetooth generic development board with BLUENRG-1.
Main components on the BLUENRG1 Generic Bluetooth Board
BLUENRG1 Generic Bluetooth Board bill of materials (BOM)
67 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BlueNRG-1 | QFN-32-1EP_5x5mm_Pitch0.5mm | U1 |
| 1 | LMT84DCK | SOT-353_SC-70-5 | U2 |
| 1 | MCP1640BCH | SOT-23-6_Handsoldering | U3 |
| 1 | AT25xxx | TSSOP-8_4.4x3mm_Pitch0.65mm | U4 |
| 1 | Crystal_Small | Crystal_SMD_3215-2pin_3.2x1.5mm | Y1 |
| 1 | Crystal_GND24_Small | Crystal_SMD_3225-4pin_3.2x2.5mm_HandSoldering | Y2 |
| 1 | Conn_01x02_Female | Pin_Header_Straight_1x02_Pitch2.00mm_SMD_Pin1Right | J1 |
| 1 | Conn_01x05_Male | Pin_Header_Straight_1x05_Pitch2.00mm_SMD_Pin1Right | J2 |
| 3 | Conn_01x03_Male | Pin_Header_Straight_1x03_Pitch2.00mm_SMD_Pin1Left | J3, J5, J6 |
| 1 | Conn_01x04_Male | Pin_Header_Straight_1x04_Pitch2.00mm_SMD_Pin1Left | J4 |
| 1 | Antenna_Shield | 2.4GHz-INVERTED-F-ANTENNA | AE1 |
| 1 | Battery_Cell | BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 1 | SW_DIP_x08 | SW_DIP_x8_W5.08mm_Slide_Copal_CHS-A | SW1 |
| 1 | LED | LED_0603 | D1 |
| 1 | 10uH | R_0805 | L1 |
| 2 | 1.3nH | R_0402_NoSilk | L2, L3 |
| 1 | 5.6nH | R_0402_NoSilk | L4 |
| 1 | 2.4nH | R_0402_NoSilk | L5 |
| 1 | 4.7uH | Inductor_1212 | L6 |
| 1 | 100pF | C_0402 | C1 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 150nF | C_0402 | C2 |
| 4 | 1uF | C_0402 | C3, C7, C16, C18 |
| 7 | 100nF | C_0402 | C4, C8, C17, C19, C23, C26, C27 |
| 4 | 15pF | C_0402 | C5, C6, C21, C22 |
| 2 | 56pF | C_0402 | C9, C12 |
| 2 | 1.3pF | C_0402 | C10, C20 |
| 3 | 0.5pF | C_0402 | C11, C13, C15 |
| 1 | C | C_0402 | C14 |
| 1 | 4.7uF | C_0402 | C24 |
| 1 | 10uF | C_0402 | C25 |
| 2 | 309k | R_0402 | R1, R13 |
| 4 | 1k | R_0402 | R2, R3, R4, R11 |
| 3 | 0R | R_0402 | R5, R6, R10 |
| 4 | 10k | R_0402 | R7, R16, R17, R18 |
| 4 | R | R_0402 | R8, R9, R14, R15 |
| 1 | 9.76k | R_0402 | R12 |
BLUENRG1 Generic Bluetooth Board design files
The KiCad project lives in the GeneRAD/BLUENRG1_Generic_Bluetooth_Board repository on GitHub; these links point at the commit this page was built from.
BLUENRG1 Generic Bluetooth Board: common questions
How big is the BLUENRG1 Generic Bluetooth Board?
The BLUENRG1 Generic Bluetooth Board measures 34.5 × 36.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BLUENRG1 Generic Bluetooth Board?
67 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the BLUENRG1 Generic Bluetooth Board design files?
From the GeneRAD/BLUENRG1_Generic_Bluetooth_Board repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the BLUENRG1 Generic Bluetooth Board design in my own project?
The repository has no license, so all rights stay with GeneRAD. Use it as a reference, and ask the author before reusing the design.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
RPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k