Design 2
About the Design 2 PCB
Design 2 is an open source PCB design by George-Emad31, published on GitHub. It is a 2-layer board measuring 74.2 × 10.5 mm, with 6 components from 5 distinct parts.
Other key parts include the L7805. By type, the board carries 2 connectors, 2 capacitors, 1 IC and 1 diode.
From the project
—----------------------------------------------------------- An Introductory Session to the field & market by Eng. Marina & Abdelrahman https://youtu.be/WNl0apc1B7U?si=2tqRJhkXzuk2Huat —----------------------------------------------------------- وليد عيسي ١- دورة الالكترونيات الع
—----------------------------------------------------------- An Introductory Session to the field & market by Eng. Marina & Abdelrahman https://youtu.be/WNl0apc1B7U?si=2tqRJhkXzuk2Huat —----------------------------------------------------------- وليد عيسي ١- دورة الالكترونيات العملية https://youtube.com/playlist?list=PLww54WQ2wa5rOJ7FcXxi-CMNgmpybv7ei&si=CNx4IFHqYKsxTS9Y
Main components on the Design 2
Design 2 bill of materials (BOM)
6 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO-220-3_Vertical | U1 |
| 2 | Conn_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1, J2 |
| 1 | MDB10S | TSSOP-4_4.4x5mm_P4mm | D1 |
| 1 | Input_Capacitor | CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | Output_Capacitor | CP_Radial_D5.0mm_P2.00mm | C2 |
Design 2 design files
The KiCad project lives in the George-Emad31/Pcb repository on GitHub; these links point at the commit this page was built from.
Design 2: common questions
How big is the Design 2 PCB?
The Design 2 measures 74.2 × 10.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Design 2?
6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Design 2 design files?
From the George-Emad31/Pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Design 2 design in my own project?
The repository has no license, so all rights stay with George-Emad31. Use it as a reference, and ask the author before reusing the design.
More boards in Pcb
AVR/ArduinoAtmega32
97.5 × 58 mm43 parts4LNo license0
AVR/ArduinoKIT
87.8 × 52.1 mm24 parts2LNo license0
L298N motor driver
39.5 × 44 mm21 parts2LNo license0
Power supply
153.5 × 60.5 mm16 parts2LNo license0
IR
37.5 × 20.5 mm9 parts2LNo license0
AVR/ArduinoTraffic
54.6 × 13 mm8 parts2LNo license0
Atmega arduino
101.6 × 53.3 mm7 parts2LNo license0