L298N motor driver
George-Emad31·Pcb·Pcb designs/3/l298N motor driver/l298N motor driver.kicad_pcb
About the L298N motor driver PCB
L298N motor driver is an open source PCB design by George-Emad31, published on GitHub. It is a 2-layer board measuring 39.5 × 44 mm, with 21 components from 10 distinct parts.
Other key parts include the L298HN and LM7805_TO220. By type, the board carries 9 diodes, 7 connectors, 2 ICs, 2 capacitors and 1 resistor.
It belongs with the robotics & motion designs in this gallery.
From the project
—----------------------------------------------------------- An Introductory Session to the field & market by Eng. Marina & Abdelrahman https://youtu.be/WNl0apc1B7U?si=2tqRJhkXzuk2Huat —----------------------------------------------------------- وليد عيسي ١- دورة الالكترونيات الع
—----------------------------------------------------------- An Introductory Session to the field & market by Eng. Marina & Abdelrahman https://youtu.be/WNl0apc1B7U?si=2tqRJhkXzuk2Huat —----------------------------------------------------------- وليد عيسي ١- دورة الالكترونيات العملية https://youtube.com/playlist?list=PLww54WQ2wa5rOJ7FcXxi-CMNgmpybv7ei&si=CNx4IFHqYKsxTS9Y
Main components on the L298N motor driver
L298N motor driver bill of materials (BOM)
21 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L298HN | TO-220-11_P3.4x5.08mm_StaggerOdd_Lead4.58mm_Vertical | U1 |
| 1 | LM7805_TO220 | TO-220-3_Vertical | U5 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J6, J13 |
| 3 | Conn_01x02_Pin | PinHeader_1x02_P1.00mm_Vertical | J15, J17, J18 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J16 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P1.00mm_Vertical | J19 |
| 8 | BAV16W | D_SOD-123 | D1, D3, D4, D5, D6, D7, D8, D9 |
| 1 | LED | LED_D3.0mm | D15 |
| 2 | C_Polarized_Small | CP_Radial_D4.0mm_P1.50mm | C3, C4 |
| 1 | R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
L298N motor driver design files
The KiCad project lives in the George-Emad31/Pcb repository on GitHub; these links point at the commit this page was built from.
L298N motor driver: common questions
How big is the L298N motor driver PCB?
The L298N motor driver measures 39.5 × 44 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the L298N motor driver?
21 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the L298N motor driver design files?
From the George-Emad31/Pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the L298N motor driver design in my own project?
The repository has no license, so all rights stay with George-Emad31. Use it as a reference, and ask the author before reusing the design.
More boards in Pcb
AVR/Arduino
Atmega32
George-Emad31
97.5 × 58 mm43 parts4LNo license0AVR/Arduino
KIT
George-Emad31
87.8 × 52.1 mm24 parts2LNo license0Power supply
George-Emad31
153.5 × 60.5 mm16 parts2LNo license0IR
George-Emad31
37.5 × 20.5 mm9 parts2LNo license0AVR/Arduino
Traffic
George-Emad31
54.6 × 13 mm8 parts2LNo license0Atmega arduino
George-Emad31
101.6 × 53.3 mm7 parts2LNo license0Design 2
George-Emad31
74.2 × 10.5 mm6 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979