Gnu plussydisplay
gitGNU·gnu_plussydisplay·display/pcb/ws2812display.kicad_pcb
About the Gnu plussydisplay PCB
Gnu plussydisplay is an open source PCB design by gitGNU, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 100 mm, with 223 components from 29 distinct parts.
Other key parts include the MAX3485, CC_XC6204, CC_STM32F401xE, CC_LM75 and CC_STM32SWD. By type, the board carries 98 capacitors, 89 ICs, 19 resistors, 7 connectors, 3 modules and 2 switches.
It belongs with the displays & leds designs in this gallery.
From the project
This repository contains free software and hardware design components for a small LED matrix resembling FSFE's plussy mascot. It is intended to be used, e.g., as an eyecatcher for fellowship events.
This repository contains free software and hardware design components for a small LED matrix resembling FSFE's plussy mascot. It is intended to be used, e.g., as an eyecatcher for fellowship events.
All files in this project (except some configuration files where stated in their header) are licensed under the GPLv3 license as stated in the next section (GPLv3 License Statement).
Main components on the Gnu plussydisplay
Gnu plussydisplay bill of materials (BOM)
223 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX3485 | if-driver-SO08 | IC101 |
| 1 | CC_XC6204 | SOT23-5 | U101 |
| 1 | CC_STM32F401xE | lqfp64 | U102 |
| 1 | CC_LM75 | SOIC-8_N | U103 |
| 1 | CC_STM32SWD | Pin_Header_Straight_1x06 | U104 |
| 64 | CC_WS2812B | WS2812B | U201, U202, U203, U204, U205, U206, U207, U208 +56 |
| 20 | CC_WS2812B | WS2812B_8MM | U265, U266, U267, U268, U269, U270, U271, U272 +12 |
| 3 | CC_MOUNT | CC_MOUNT_PLATED_M3 | M201, M202, M203 |
| 1 | MOS_N | CC_SOT23_MOS1 | Q201 |
| 1 | 12MHz | Q_EUROQUARTZ_MJ_3x5x1 | X101 |
| 1 | CONN_02X03 | Pin_Header_Straight_2x03 | P101 |
| 5 | CONN_01X02 | Pin_Header_Straight_1x02 | P102, P104, P105, P106, P107 |
| 1 | CONN_01X03 | Pin_Header_Straight_1x03 | P108 |
| 2 | SW_PUSH | TASTER_3305B | SW101, SW102 |
| 1 | LED_G | LED-0603 | D101 |
| 1 | LED_R | LED-0603 | D102 |
| 1 | BEAD | rcl-cc-0603 | L101 |
| 2 | 1u/10V | rcl-cc-0603 | C101, C102 |
| 91 | 100n | rcl-cc-0603 | C103, C108, C109, C110, C111, C112, C113, C201 +83 |
| 2 | 12p | rcl-cc-0603 | C104, C105 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2u2/6V | rcl-cc-0603 | C106 |
| 2 | 1u | rcl-cc-0603 | C107, C114 |
| 3 | 100 | rcl-cc-0603 | R101, R102, R110 |
| 2 | 470 | rcl-cc-0603 | R103, R109 |
| 6 | 10k | rcl-cc-0603 | R104, R105, R114, R115, R116, R117 |
| 3 | 100k | rcl-cc-0603 | R106, R107, R108 |
| 1 | 0 | rcl-cc-0603 | R111 |
| 2 | n.b. | rcl-cc-0603 | R112, R113 |
| 2 | 1k | rcl-cc-0603 | R201, R202 |
Gnu plussydisplay design files
The KiCad project lives in the gitGNU/gnu_plussydisplay repository on GitHub; these links point at the commit this page was built from.
Gnu plussydisplay: common questions
How big is the Gnu plussydisplay PCB?
The Gnu plussydisplay measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gnu plussydisplay?
223 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gnu plussydisplay design files?
From the gitGNU/gnu_plussydisplay repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Gnu plussydisplay design in my own project?
Yes, under the terms of its GPL-3.0 license, which gitGNU chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k