Edison motor controller bulb
glocklueng·edison-motor-controller-bulb·hardware/motor-controller.kicad_pcb
About the Edison motor controller bulb PCB
Edison motor controller bulb is an open source STM32 PCB design by glocklueng, published on GitHub. It is a 2-layer board measuring 75 × 50 mm, with 56 components from 22 distinct parts.
Its main chip is the STM32F030K6T6, from the STM32 family. Other key parts include the 74125, ST-LIS3MDL, IRLML2803TRPBF, 7408 and MC33926. By type, the board carries 21 capacitors, 16 resistors, 8 ICs, 7 connectors and 4 modules.
It belongs with the robotics & motion designs in this gallery.
Main components on the Edison motor controller bulb
Edison motor controller bulb bill of materials (BOM)
56 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74125 | SOIC127P600X175-14N | U1 |
| 1 | STM32F030K6T6 | QFP80P900X900X160-32N | U101 |
| 1 | ST-LIS3MDL | LGA12S50P4X4_192X192X100 | U102 |
| 2 | IRLML2803TRPBF | SOT95P237X112_123-3N | U201, U202 |
| 1 | 7408 | SOIC127P600X175-14N | U203 |
| 2 | MC33926 | PQFN80P800X800X220-33N | U204, U205 |
| 4 | Mounting Hole | MTGNP565H328Z565P | M1, M2, M3, M4 |
| 1 | VTEST | HDRV3W66P254_1X3_762X249X838P | P1 |
| 1 | BATTERY | TECONN-2-1445098-2 | P101 |
| 1 | SWD | HDRV6W66P254_1X6_1524X249X838P | P102 |
| 1 | EDISON-BULB-E10 | SHDRV10W66P254_2X5_2286X910X910P | P103 |
| 1 | FTDI-PLUG | HDRV6W66P254_1X6_1524X249X838P | P104 |
| 2 | P06-MOTOR | JST-S6B-PH-K | P201, P202 |
| 1 | 100uF | CAPAE660X790N | C1 |
| 7 | 0.1uF | CAPC2012X100N | C101, C102, C103, C105, C106, C201, C214 |
| 1 | 1uF | CAPC2012X100N | C104 |
| 2 | 100uF 35V | CAPAE660X790N | C202, C203 |
| 8 | 0.1uF 35V | CAPC2012X100N | C204, C205, C206, C207, C208, C209, C210, C211 |
| 2 | 33nF 35V | CAPC2012X100N | C212, C213 |
| 2 | 4.7K | RESC2012X100N | R101, R102 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | 10K | RESC2012X100N | R201, R202, R203, R204, R205, R206, R207, R208 +4 |
| 2 | 270R | RESC2012X100N | R213, R214 |
Edison motor controller bulb design files
The KiCad project lives in the glocklueng/edison-motor-controller-bulb repository on GitHub; these links point at the commit this page was built from.
Edison motor controller bulb: common questions
What microcontroller does the Edison motor controller bulb use?
The Edison motor controller bulb is built around the STM32F030K6T6, from the STM32 family.
How big is the Edison motor controller bulb PCB?
The Edison motor controller bulb measures 75 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Edison motor controller bulb?
56 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Edison motor controller bulb design files?
From the glocklueng/edison-motor-controller-bulb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Edison motor controller bulb design in my own project?
The repository has no license, so all rights stay with glocklueng. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Edison motor controller bulb without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k