12 open source boards using the 7408
Real designs built with the 7408, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
C64-250407-Replica
bwack
390 × 179.8 mm214 parts2LCERN-OHL-1.2116486 Board
FoxCutter
233.4 × 100 mm114 parts4LBSD-3-Clause44Retro
bytemind-dev
340.4 × 215.9 mm382 parts4LNo license7STM32
TelepresenceRobot
joeferner
84.6 × 84.6 mm133 parts2LNo license3Sstc
hnaderi
100 × 80 mm102 parts2LCC0-1.03Prometheus-VLB
computerguy096
240.5 × 69.4 mm74 parts4LGPL-3.03Mainboard
btb
414.3 × 266.7 mm155 parts2LNo license0STM32
Edison motor controller bulb
glocklueng
75 × 50 mm56 parts2LNo license0Frequency-Meter
rakshit9695
88 × 94.5 mm28 parts2LNo license0- schematic only · 58 parts
Data-Specialties-SRP-3075
jnpastin
58 partsGPL-3.00 8-bit computer Input Module
xrayer2000
106 parts2LCC-BY-NC-4.030Stack DIP
charlespax
14 × 30.1 mm17 parts2LMIT0
How designs wire the 7408
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 7408 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 2 | Connected to: 7404 22% |
|
| GNDpin 7 | Connected to: GND 100% | — |
| VCCpin 14 | Connected to: VCC 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include C64-250407-Replica-KiCad by bwack, 486 Board by FoxCutter, Retro by bytemind-dev and Prometheus-VLB by computerguy096.
The 7408 in open source designs
The gallery holds 12 open source boards using the 7408 from 12 GitHub repositories; a typical one measures about 166.7 × 89.5 mm and carries around 104 components.
73% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is C64-250407-Replica-KiCad by bwack.
Microcontrollers on boards using the 7408
What boards using the 7408 are built for
7408: common questions
Where can I find a 7408 reference design?
Each of the 12 boards on this page is a real design using the 7408. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 7408 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the 7408.
What parts are used alongside the 7408?
The 7404, 7400, 74123, 7474 and 74HC74 appear in the most repositories here.
Which microcontrollers do boards using the 7408 use?
Most are built on STM32 (2).
How big is a typical board using the 7408?
The median is 166.7 × 89.5 mm, and 73% are two-layer designs.
What is the most popular open source board using the 7408?
By GitHub stars, C64-250407-Replica-KiCad by bwack, with 116 stars.
Can I simulate one of these boards using the 7408 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.