9 open source boards using the STM32F030K6T6
Real designs built with the STM32F030K6T6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Neotron-Pico
Neotron-Compute
243.8 × 171.5 mm220 parts4LNo license249STM32
Sympetrum V2
borgel
98.8 × 77.4 mm60 partsMIT28STM32
STM32F030K6
r-pv
22 × 41 mm23 parts2LGPL-3.011STM32
SYS StepAtten
schilkp
122 × 84 mm142 parts2LMIT0STM32
Edison motor controller bulb
glocklueng
75 × 50 mm56 parts2LNo license0STM32
Stm32F0 devboard
Thiird
20.4 × 40.6 mm34 parts2LNo license0STM32
Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1kSTM32
Sympetrum v2 NFF1.1
borgel
40 × 80 mm49 partsMIT28STM32
Sympetrum v2 NFF1
borgel
50 × 50 mm45 partsMIT28
How designs wire the STM32F030K6T6
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the STM32F030K6T6 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF).
- The VDDA pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 10 nF).
- The NRST pin has a capacitor to GND on 5 of 7 designs, most often 100 nF (then 1 µF).
- The PA0 pin has a resistor to GND on 4 of 7 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1, 17 | Connected to: 3.3V 100% |
|
| PF0pin 2 | Connected to: Signal 57% · not connected 43% |
|
| PF1pin 3 | Connected to: Signal 57% · not connected 43% |
|
| NRSTpin 4 | Connected to: A connector 43% |
|
| VDDApin 5 | Connected to: 3.3V 100% |
|
| PA0pin 6 | Connected to: A connector 43% |
|
| PA1pin 7 | Connected to: A connector 57% |
|
| VSSpin 16, 32 | Connected to: GND 100% | — |
| BOOT0pin 31 | Connected to: Signal 86% |
|
21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Module 16S by stuartpittaway, Neotron-Pico by Neotron-Compute, Sympetrum V2 by borgel and STM32F030K6 by r-pv.
The STM32F030K6T6 in open source designs
The gallery holds 9 open source boards using the STM32F030K6T6 from 7 GitHub repositories; a typical one measures about 71.1 × 77.3 mm and carries around 56 components.
67% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is Module 16S by stuartpittaway.
Microcontrollers on boards using the STM32F030K6T6
What boards using the STM32F030K6T6 are built for
STM32F030K6T6: common questions
Where can I find a STM32F030K6T6 reference design?
Each of the 9 boards on this page is a real design using the STM32F030K6T6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32F030K6T6 VDD pin?
The VDD pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the STM32F030K6T6.
What decoupling capacitors do designs use on the STM32F030K6T6 VDDA pin?
The VDDA pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 7 open source designs using the STM32F030K6T6.
How is the STM32F030K6T6 NRST pin connected?
The NRST pin has a capacitor to GND on 5 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the STM32F030K6T6.
Which microcontrollers do boards using the STM32F030K6T6 use?
Most are built on STM32 (8) and RP2040/RP2350 (1).
How big is a typical board using the STM32F030K6T6?
The median is 71.1 × 77.3 mm, and 67% are two-layer designs.
What is the most popular open source board using the STM32F030K6T6?
By GitHub stars, Module 16S by stuartpittaway, with 1,143 stars.
Can I simulate one of these boards using the STM32F030K6T6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.