Analog-ESR-Meter
glydeck·Analog-ESR-Meter·ESR_Meter_KicadProject/ESR_Meter_04.kicad_pcb
About the Analog-ESR-Meter PCB
Analog-ESR-Meter is an open source PCB design by glydeck, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 100 × 60 mm, with 44 components from 20 distinct parts.
Other key parts include the 74HC14, TL082 and LF356. By type, the board carries 25 resistors, 6 diodes, 6 capacitors, 4 ICs and 2 transistors.
From the project
How to construct an ESR meter to check capacitors, OpenSCAD, KiCad, SVG
- Elektor - A Simple Analog ESR Meter - My First PCB
The ESR Meter is basically an AC Ohmmeter with special scales and protective circuitry. It provides a continuous reading of series resistance in electrolytic capacitors. It operates at 100 kHz to keep the capacitive reactance factor near zero. The remaining series resistance is due to the electrolyte between the capacitor plates and indicates the state of dryness. Capacitor termination problems also show up plainly due to the continuous ohmic reading.

Main components on the Analog-ESR-Meter
Analog-ESR-Meter bill of materials (BOM)
44 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC14 | DIP-14_W7.62mm_Socket_LongPads | U1 |
| 2 | TL082 | DIP-8_W7.62mm_Socket_LongPads | U2, U3 |
| 1 | LF356 | DIP-8_W7.62mm_Socket_LongPads | U4 |
| 1 | TIP41 | TO-220-3_Vertical | Q1 |
| 1 | TIP42 | TO-220-3_Vertical | Q2 |
| 1 | 50k | Potentiometer_Bourns_3266Y_Vertical | RV18 |
| 4 | 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D5, D6 |
| 2 | 1N914 | D_DO-35_SOD27_P7.62mm_Horizontal | D3, D4 |
| 2 | .01 uf | C_Disc_D10.0mm_W2.5mm_P5.00mm | C1, C3 |
| 1 | .47 uf | C_Rect_L41.5mm_W13.0mm_P37.50mm_MKS4 | C2 |
| 1 | 100 pf | C_Disc_D7.0mm_W2.5mm_P5.00mm | C4 |
| 2 | CP_Radial_D7.5mm_P2.50mm | CP_Radial_D7.5mm_P2.50mm | C5, C6 |
| 4 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R10, R12, R14 |
| 5 | 680 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4, R5, R6 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 4 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R9, R24, R25 |
| 1 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 7 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13, R15, R16, R17, R19, R20, R21 |
| 2 | 3.6k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R22, R23 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R26 |
Analog-ESR-Meter design files
The KiCad project lives in the glydeck/Analog-ESR-Meter repository on GitHub; these links point at the commit this page was built from.
Analog-ESR-Meter: common questions
How big is the Analog-ESR-Meter PCB?
The Analog-ESR-Meter measures 100 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Analog-ESR-Meter?
44 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Analog-ESR-Meter design files?
From the glydeck/Analog-ESR-Meter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Analog-ESR-Meter design in my own project?
Yes, under the terms of its CC0-1.0 license, which glydeck chose for the repository.