Gmm
About the Gmm PCB
Gmm is an open source PCB design by GMM-7550, published on GitHub. It is a 6-layer board measuring 50 × 75 mm, with 240 components from 78 distinct parts.
Other key parts include the ECMF4-40A100N10, ECMF02-2AMX6, AP7330D, TUSB542 and SN65LVDS4RSER. By type, the board carries 137 capacitors, 71 resistors, 13 ICs, 10 inductors, 5 connectors and 3 jumpers.
From the project
CologneChip GateMate FPGA Module: GMM-7550
USB 3 adapter board is out of production, RP2040 firmware is running, and basic functionality is tested -- no hardware issues discovered.
USB 3 adapter board is ready for production after the schematic changes and layout. KiCad 3D render of the board:
An experimental USB 3 Adapter board schematic is ready for layout:
The project repositories are moved to a dedicated account. Please, update your references to to follow further development.
Main components on the Gmm
Gmm bill of materials (BOM)
240 components, 78 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ECMF4-40A100N10 CCGM1A1 | BGA-324_15.0x15.0mm_Layout18x18_P0.8mm_Ball0.45mm_Pad0.35mm_NSMD | U1 |
| 1 | ECMF4-40A100N10 CDCE6214 | Texas_RGE0024H_EP2.7x2.7mm_ThermalVias | U2 |
| 1 | ECMF02-2AMX6 ADP1753 | QFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm_ThermalVias | U3 |
| 1 | AP7330D STG3692 | QFN-16-1EP_2.6x1.8mm_P0.4mm_EP1.5x0.7mm | U4 |
| 1 | TUSB542 STG3692 | QFN-16-1EP_2.6x1.8mm_P0.4mm_EP1.5x0.7mm | U5 |
| 1 | SN65LVDS4RSER 74LVC1G08 | SOT-353_SC-70-5 | U6 |
| 1 | USB3340 74LVC1G07 | SOT-23-5 | U7 |
| 1 | STUSB03E STG3692 | QFN-16-1EP_2.6x1.8mm_P0.4mm_EP1.5x0.7mm | U8 |
| 1 | SIP32510 IS25LQ032B-JNLE | SO-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | SN74LVC1G07DBV PCA9539AHF | Texas_S-PVQFN-N24_EP2.1x2.1mm | U10 |
| 1 | INA180A2 TPS3840DL28DBV | SOT-23-5 | U11 |
| 2 | AP7330D ADP2164 | QFN-16-1EP_4x4mm_P0.65mm_EP2.5x2.5mm_ThermalVias | U12, U13 |
| 1 | 445I23D12M00000 NX3225SA | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 5 | 10144518-061802LF | 10144518-061802LF | P1, P2, P3, P4, P5 |
| 3 | SolderJumper_2_Open_Small | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 8 | MPZ1608S181ATAH0 | L_0603_1608Metric | L1, L2, L3, L4, L6, L7, L8, L9 |
| 2 | ASPIAIG-FLR4020-1R0M-T | L_Abracon_F4020_4.1x4.1mm | L5, L10 |
| 1 | 0.1UF DNI | C_0402_1005Metric | C1 |
| 1 | 1.0UF DNI | C_0402_1005Metric | C2 |
| 5 | 1.0UF 0.1uF | C_0402_1005Metric | C3, C13, C44, C48, C49 |
Show 58 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 0.1UF 2.2uF | C_0603_1608Metric | C4, C9, C12, C15, C22, C32, C41 |
| 15 | 0.1UF 0.1uF | C_0402_1005Metric | C5, C8, C10, C14, C16, C21, C26, C34 +7 |
| 2 | 0.1UF 0.01uF | C_0402_1005Metric | C6, C7 |
| 3 | 0.01UF 0.1uF | C_0402_1005Metric | C11, C45, C56 |
| 1 | 1.0UF 0.01uF | C_0402_1005Metric | C17 |
| 1 | 1.0UF 2.2uF | C_0603_1608Metric | C18 |
| 5 | 2.2UF 0.1uF | C_0402_1005Metric | C19, C20, C27, C28, C29 |
| 1 | 0.01UF 0.47uF | C_0603_1608Metric | C23 |
| 40 | 0.1uF | C_0402_1005Metric | C24, C25, C54, C55, C57, C58, C59, C64 +32 |
| 1 | 2.2UF 0.47uF | C_0603_1608Metric | C30 |
| 1 | 2.2UF 2.2uF | C_0603_1608Metric | C31 |
| 2 | 0.1UF 0.47uF | C_0603_1608Metric | C33, C40 |
| 1 | 27PF 2.2uF | C_0603_1608Metric | C42 |
| 1 | 27PF 0.47uF | C_0603_1608Metric | C43 |
| 1 | 10UF 0.47uF | C_0603_1608Metric | C50 |
| 2 | 10UF 2.2uF | C_0603_1608Metric | C51, C52 |
| 1 | 1.0UF 0.47uF | C_0603_1608Metric | C53 |
| 6 | 0.47uF | C_0603_1608Metric | C60, C63, C67, C68, C69, C70 |
| 10 | 2.2uF | C_0603_1608Metric | C61, C109, C110, C127, C128, C129, C130, C131 +2 |
| 1 | 2.2uF | C_0805_2012Metric | C62 |
| 13 | 0.01uF | C_0402_1005Metric | C73, C76, C77, C80, C83, C84, C87, C90 +5 |
| 4 | 47uF | C_1210_3225Metric | C103, C112, C115, C116 |
| 1 | 1500pF | C_0402_1005Metric | C111 |
| 8 | 22uF | C_1206_3216Metric | C113, C114, C120, C121, C122, C123, C124, C125 |
| 2 | 10uF | C_0805_2012Metric | C119, C126 |
| 3 | 33 | R_0402_1005Metric | R1, R22, R25 |
| 3 | DNI | R_0402_1005Metric | R2, R6, R27 |
| 6 | 10K 33 | R_0402_1005Metric | R3, R29, R31, R32, R34, R42 |
| 1 | 8.06K 100 | R_0402_1005Metric | R4 |
| 13 | 10k | R_0402_1005Metric | R5, R18, R41, R45, R46, R47, R48, R49 +5 |
| 1 | 200 | R_0402_1005Metric | R7 |
| 2 | 1k | R_0402_1005Metric | R8, R9 |
| 3 | DNI | R_0603_1608Metric | R10, R11, R12 |
| 1 | 10K DNI | R_0603_1608Metric | R13 |
| 2 | 5.1K DNI | R_0603_1608Metric | R14, R16 |
| 1 | 100 DNI | R_0603_1608Metric | R15 |
| 1 | 27.4 DNI | R_0603_1608Metric | R17 |
| 4 | 100k | R_0402_1005Metric | R19, R30, R33, R44 |
| 6 | 10K 10k | R_0402_1005Metric | R20, R21, R35, R50, R51, R56 |
| 1 | 10K 1k | R_0402_1005Metric | R23 |
| 1 | 8.06K 10k | R_0402_1005Metric | R24 |
| 1 | 10K 10 | R_0402_1005Metric | R26 |
| 1 | 27.4 100k | R_0402_1005Metric | R28 |
| 1 | 100 33 | R_0402_1005Metric | R36 |
| 1 | 0.02 10k | R_0402_1005Metric | R37 |
| 1 | 120K 10k | R_0402_1005Metric | R38 |
| 1 | 100K 10k | R_0402_1005Metric | R39 |
| 1 | 100 10k | R_0402_1005Metric | R40 |
| 1 | 10K 100k | R_0402_1005Metric | R43 |
| 1 | 5.1K 10 | R_0402_1005Metric | R57 |
| 1 | 5.1K 2k | R_0402_1005Metric | R58 |
| 2 | 27.4 10k | R_0402_1005Metric | R60, R61 |
| 2 | 100 15k | R_0402_1005Metric | R62, R63 |
| 1 | 10 | R_0402_1005Metric | R64 |
| 2 | 47.5k | R_0402_1005Metric | R66, R67 |
| 2 | 15k | R_0402_1005Metric | R68, R75 |
| 2 | 2.49k | R_0402_1005Metric | R69, R73 |
| 1 | 7.5k | R_0402_1005Metric | R74 |
Gmm design files
The KiCad project lives in the GMM-7550/gmm7550-hardware repository on GitHub; these links point at the commit this page was built from.
Gmm: common questions
How big is the Gmm PCB?
The Gmm measures 50 × 75 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Gmm?
240 components, from 78 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Gmm design files?
From the GMM-7550/gmm7550-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Gmm design in my own project?
The repository has no license, so all rights stay with GMM-7550. Use it as a reference, and ask the author before reusing the design.
