30 open source boards using the ECMF02-2AMX6

Real designs built with the ECMF02-2AMX6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

30 boardsClear filters|Most starred

How designs wire the ECMF02-2AMX6

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the ECMF02-2AMX6 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 3Connected to: GND 87%
NCpin 4Connected to: Not connected 81%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Meko by KOEGlike, Gmm by GMM-7550, Stargazer Camera Board MK2.1 by ISSUIUC and HFLink by LX050724.

The ECMF02-2AMX6 in open source designs

The gallery holds 30 open source boards using the ECMF02-2AMX6 from 15 GitHub repositories; a typical one measures about 61.4 × 74.3 mm and carries around 109 components.

90% use four copper layers or more, and 37% carry an open source license.

The most starred is Meko by KOEGlike.

Microcontrollers on boards using the ECMF02-2AMX6

ECMF02-2AMX6: common questions

Where can I find a ECMF02-2AMX6 reference design?

Each of the 30 boards on this page is a real design using the ECMF02-2AMX6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ECMF02-2AMX6?

The AMS1117-3.3, RP2040, MT9700, TPS7A9401DSCR and W25Q128JVPIQ appear in the most repositories here.

Which microcontrollers do boards using the ECMF02-2AMX6 use?

Most are built on ESP32 (13), RP2040/RP2350 (7), STM32 (2) and FPGA (1).

How big is a typical board using the ECMF02-2AMX6?

The median is 61.4 × 74.3 mm, and 10% are two-layer designs.

What is the most popular open source board using the ECMF02-2AMX6?

By GitHub stars, Meko by KOEGlike, with 84 stars.

Can I simulate one of these boards using the ECMF02-2AMX6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part