Sdnes
going-digital·sdnes·nes/sdnes.kicad_pcb
About the Sdnes PCB
Sdnes is an open source PCB design by going-digital, published on GitHub. It is a 2-layer board measuring 17.8 × 22.4 mm, with 5 components from 5 distinct parts.
By type, the board carries 1 connector, 1 diode, 1 capacitor and 1 resistor.
It belongs with the retro computing designs in this gallery.
From the project
SD converter mod-board for the Nintendo NES Classic, Famicom classic, SNES Classic and Superfamicom classic. For use with Hakchi.
This design is a mod-board that solders directly onto the PCB. This board allows the console to a Micro-SD card. This works well with Hakchi and the tools at Hakchi Resources. The board is designed with KiCad 5.
It is: Cheap Home solderable (although you will need a fine tip) Compatible with Hakchi firmware Tidy Open source NOT easy to solder. The minimal install requires soldering pads that are 1mm apart. If you are used to soldering surface mount, no problem. If not, this should not be your first project. (But it is open source, so if you want to flood eBay with them, be my guest!) NOT as…

Sdnes bill of materials (BOM)
5 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 500901-0801 | MOLEX_500901-0801 | J2 |
| 1 | nesclassic:Testpoint_cluster | FTM-NES-SD-pads | SK2 |
| 1 | Red LED | LED_0603 | D2 |
| 1 | C_Small | C_0603 | C2 |
| 1 | 1K | R_0603 | R2 |
Sdnes design files
The KiCad project lives in the going-digital/sdnes repository on GitHub; these links point at the commit this page was built from.
- Layoutnes/sdnes.kicad_pcb
Sdnes: common questions
How big is the Sdnes PCB?
The Sdnes measures 17.8 × 22.4 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Sdnes?
5 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sdnes design files?
From the going-digital/sdnes repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Sdnes design in my own project?
The repository has no license, so all rights stay with going-digital. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k