28V-Power-Control-Interface

gorkemorakbicen·28V-Power-Control-Interface·hardware/28V_Power_Control_Interface.kicad_pcb

28V-Power-Control-Interface PCB layout, top view — open source STM32 board by gorkemorakbicen

About the 28V-Power-Control-Interface PCB

28V-Power-Control-Interface is an open source STM32 PCB design by gorkemorakbicen, published on GitHub. It is a 4-layer board measuring 70.3 × 67.8 mm, with 52 components from 40 distinct parts.

Its main chip is the STM32G0B1CBT6, from the STM32 family. Other key parts include the LM5164DDAT, TLV75533PDBVR and TJA1049T/3/1Z. By type, the board carries 21 capacitors, 15 resistors, 4 ICs, 4 diodes, 3 connectors and 1 transistor.

It belongs with the power & battery and test & measurement designs in this gallery.

From the project

Four-layer PCB design for a nominal 28 V DC input, with input protection, a 5 V buck converter, a 3.3 V logic supply, STM32 voltage-sensing inputs, and a CAN physical interface.

Four-layer PCB design for a nominal 28 V DC input, with input protection, a 5 V buck converter, a 3.3 V logic supply, STM32 voltage-sensing inputs, and a CAN physical interface.

This personal hardware-design project explores the process of developing a compact monitoring and communication board for a nominal 28 V DC supply. The work covers component selection, hand calculations, schematic capture, four-layer PCB layout, basic design-rule verification, and technical documentation.

28V-Power-Control-Interface, from the project README
From the project README

Main components on the 28V-Power-Control-Interface

28V-Power-Control-Interface bill of materials (BOM)

52 components, 40 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM5164DDAT
LM5164DDA
U1
1
TLV75533PDBVR
TLV75533PDBV
U2
1
STM32G0B1CBT6
STM32G0B1CBTx
U3
1
TJA1049T/3/1Z
TJA1049T-3
U4
1
SQM100P10-19L_GE3
SQM100P10-19L
Q1
1
CX3225FB16000F0FZZH1
16MHz
Y1
1
1715721
Screw_Terminal_01x02
J1
1
61300511121
Conn_01x05_Pin
J2
1
1715734
Screw_Terminal_01x03
J3
1
0451001.MRL
1A
F1
1
B3U-1000P
SW_Push
SW1
1
BZT52C12Q-7-F
BZT52C12Q
D1
1
SMBJ36CA
D2
1
LTST-C190KRKT
LED_RED
D3
1
PESD2CANFD24V-T
D4
1
MSS1260T-473MLD
47uH
L1
1
GCM155R71H222KA37D
2.2nF
C1
1
UCZ2A220MCS1GS
22uF/100V
C2
2
CGA6N3X7R2A225K230AB
2.2uF
C3, C4
1
GRM188R72A332KA01D
3.3nF
C5
Show 20 more
QtyPartRefs
1
CGA6P1X7R1C226M250AC
22uF
C6
1
CGA6P1X7R1C226M250AC
22uF (DNP)
C7
1
CGA3E2C0G1H820J080AA
82pF
C8
2
GRM21BR71C225KA12L
2.2uF
C9, C10
5
GRM188R72A104KA35D
100nF
C11, C13, C16, C18, C19
1
C2012X7R1C475K125AB
4.7uF
C12
2
GRM188R72A103KA01D
10nF
C14, C15
1
GRM21BR71C105KA01L
1uF
C17
2
CGA3E2C0G1H120J080AA
12pF
C20, C21
1
AC1206FR-073K3L
3.3k
R1
1
AC0603FR-071ML
1M
R2
1
AC0603FR-07200KL
200k
R3
1
RT0603BRD07316KL
316k
R4
1
AC0603FR-07100KL
100k
R5
1
AC0603FR-0741K2L
41.2k
R6
1
RT0603BRD07100KL
100k
R7
2
AC0603FR-07165KL
165k
R8, R10
4
AC0603FR-0710KL
10k
R9, R11, R12, R14
1
AC0603FR-071KL
1k
R13
1
AC1206FR-07120RL
120 (DNP)
R15

28V-Power-Control-Interface design files

The KiCad project lives in the gorkemorakbicen/28V-Power-Control-Interface repository on GitHub; these links point at the commit this page was built from.

28V-Power-Control-Interface: common questions

What microcontroller does the 28V-Power-Control-Interface use?

The 28V-Power-Control-Interface is built around the STM32G0B1CBT6, from the STM32 family.

How big is the 28V-Power-Control-Interface PCB?

The 28V-Power-Control-Interface measures 70.3 × 67.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the 28V-Power-Control-Interface?

52 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 28V-Power-Control-Interface design files?

From the gorkemorakbicen/28V-Power-Control-Interface repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 28V-Power-Control-Interface design in my own project?

The repository has no license, so all rights stay with gorkemorakbicen. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 28V-Power-Control-Interface without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards