17 open source boards using the STM32G0B1CBT6
Real designs built with the STM32G0B1CBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
DCServo
Alex-C-EE
40 × 40 mm57 parts4LNo license14STM32
Pcap04-capacitance readout
NautyXie
100 × 100 mm69 parts4LMIT2STM32
BMW-F20-AHU-CAN-Relay
Richard-CRT
56.7 × 45.1 mm58 parts4LNo license1STM32
Default
RileyLeff
100 × 65 mm234 parts6LNo license0STM32
OpenSimGear generic STM32G0B1 module
opensimgear
85 × 75 mm107 parts4LCustom license0STM32
Kart bridge board
carbuncle01
60 × 30 mm61 parts4LNo license0STM32
Ggsmdriver
gustavgaston
55 × 45 mm59 parts4LNo license0STM32
K2 v4 8L
dataxcash
120 × 46 mm42 parts8LAGPL-3.00STM32
Device gateway
opensimgear
65 × 55 mm41 parts4LCustom license0ESP32
Microll
RubenTrov
39 × 46 mm36 parts2LNo license0STM32
Candlelight GNX
raulperdomo
117.4 × 57.8 mm27 parts2LNo license0STM32
Default.active pre v0.2-hydration
RileyLeff
100 × 65 mm234 parts6LNo license0STM32
K2 v4 8L.l4
dataxcash
120 × 46 mm42 parts8LAGPL-3.00STM32
Milling coupon
opensimgear
45 × 35 mm30 parts2LCustom license0STM32
Mainboard
oats-center
286.5 × 96.1 mm63 parts4LNo license3STM32
Default.shipped v0.1
RileyLeff
100 × 65 mm234 parts6LNo license0STM32
Akd safe sensor node
zinedkahitaf-lang
205 × 165 mm120 parts6LNo license0
How designs wire the STM32G0B1CBT6
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the STM32G0B1CBT6 connects to, and the resistors, capacitors and other passives placed on it.
- The PF2 pin has a capacitor to GND on 12 of 13 designs, most often 100 nF.
- The VDD pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 4.7 µF).
- The PA15 pin is left unconnected on 10 of 12 designs (a signal on 2).
- The VBAT pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PC13pin 1 | Connected to: Not connected 62% · a signal 38% | — |
| PC15pin 3 | Connected to: Not connected 62% · a signal 31% | — |
| VBATpin 4 | Connected to: 3.3V 69% · a signal 23% |
|
| VREF+pin 5 | Connected to: 3.3V 69% · not connected 15% · a signal 15% |
|
| VDDpin 6 | Connected to: 3.3V 85% |
|
| VSSpin 7 | Connected to: GND 92% | — |
| PF0pin 8 | Connected to: Not connected 62% · a signal 38% | — |
| PF1pin 9 | Connected to: Not connected 69% · a signal 31% | — |
| PF2pin 10 | Connected to: A connector 54% |
|
| PB10pin 22 | Connected to: Not connected 62% · a signal 38% | — |
| PB11pin 23 | Connected to: Not connected 69% · a signal 31% | — |
| PB13pin 25 | Connected to: Not connected 62% · a signal 38% | — |
| PB15pin 27 | Connected to: Not connected 69% · a signal 31% | — |
| PA8pin 28 | Connected to: Not connected 62% · a signal 38% | — |
| PC6pin 30 | Connected to: Not connected 69% · GND 15% · a signal 15% | — |
| PC7pin 31 | Connected to: Not connected 62% · a signal 31% | — |
| PA10/UCPD1_DBCC2pin 32 | Connected to: Not connected 62% · a signal 38% | — |
| PA14pin 36 | Connected to: A connector 83% |
|
| PA15pin 37 | Connected to: Not connected 83% · a signal 17% | — |
| PD2pin 40 | Connected to: Not connected 75% · a signal 25% | — |
| PD3pin 41 | Connected to: Not connected 67% · a signal 33% | — |
| PB3pin 42 | Connected to: Not connected 67% · a signal 33% | — |
| PB6pin 45 | Connected to: Not connected 67% · a signal 33% | — |
| PB7pin 46 | Connected to: Not connected 75% · a signal 25% | — |
| PB9pin 48 | Connected to: Not connected 67% · a signal 33% | — |
23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DCServo by Alex-C-EE, Mainboard by oats-center, Pcap04-capacitance readout by NautyXie and BMW-F20-AHU-CAN-Relay by Richard-CRT.
The STM32G0B1CBT6 in open source designs
The gallery holds 17 open source boards using the STM32G0B1CBT6 from 13 GitHub repositories; a typical one measures about 100 × 55 mm and carries around 59 components.
82% use four copper layers or more, and 18% carry an open source license.
The most starred is DCServo by Alex-C-EE.
Parts used alongside the STM32G0B1CBT6
What boards using the STM32G0B1CBT6 are built for
STM32G0B1CBT6: common questions
Where can I find a STM32G0B1CBT6 reference design?
Each of the 17 boards on this page is a real design using the STM32G0B1CBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32G0B1CBT6 PF2 pin connected?
The PF2 pin has a capacitor to GND on 12 of 13 designs, most often 100 nF. Counted from the KiCad layouts of 13 open source designs using the STM32G0B1CBT6.
What decoupling capacitors do designs use on the STM32G0B1CBT6 VDD pin?
The VDD pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 13 open source designs using the STM32G0B1CBT6.
How is the STM32G0B1CBT6 PA15 pin connected?
The PA15 pin is left unconnected on 10 of 12 designs (a signal on 2). Counted from the KiCad layouts of 13 open source designs using the STM32G0B1CBT6.
What parts are used alongside the STM32G0B1CBT6?
The USBLC6-2SC6, TLV75533PDBVR, LM66100DCKR, R-78E5.0-0.5 and TCAN3413D appear in the most repositories here.
Which microcontrollers do boards using the STM32G0B1CBT6 use?
Most are built on STM32 (16) and ESP32 (1).
How big is a typical board using the STM32G0B1CBT6?
The median is 100 × 55 mm, and 18% are two-layer designs.
What is the most popular open source board using the STM32G0B1CBT6?
By GitHub stars, DCServo by Alex-C-EE, with 14 stars.
Can I simulate one of these boards using the STM32G0B1CBT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.