69 open source boards using the TLV75533PDBVR

Real designs built with the TLV75533PDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

69 boardsClear filters|Most starred

How designs wire the TLV75533PDBVR

Read from the KiCad layouts of 53 open source designs, one per repository: what each pin of the TLV75533PDBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin is tied to 3.3V on 46 of 53 designs (a signal on 7).
  • The IN pin is tied to 5V on 39 of 53 designs (a signal on 14).
  • The EN pin is tied to 5V on 36 of 53 designs (a signal on 17).
INpin 1Connected to: 5V 74% · a signal 26%
GNDpin 2Connected to: GND 98%
ENpin 3Connected to: 5V 68% · a signal 32%
NCpin 4Connected to: Not connected 92%
OUTpin 5Connected to: 3.3V 87%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Silkscreen pcb by iandchasse, Storm tracker hardware by solderable, SF2000 by jbilander and Freesk8-Robogotchi v1.5 by FreeSK8.

The TLV75533PDBVR in open source designs

The gallery holds 69 open source boards using the TLV75533PDBVR from 57 GitHub repositories; a typical one measures about 76 × 60 mm and carries around 83 components.

68% use four copper layers or more, and 36% carry an open source license.

The most starred is Silkscreen pcb by iandchasse.

Microcontrollers on boards using the TLV75533PDBVR

TLV75533PDBVR: common questions

Where can I find a TLV75533PDBVR reference design?

Each of the 69 boards on this page is a real design using the TLV75533PDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV75533PDBVR OUT pin connected?

The OUT pin is tied to 3.3V on 46 of 53 designs (a signal on 7). Counted from the KiCad layouts of 53 open source designs using the TLV75533PDBVR.

How is the TLV75533PDBVR IN pin connected?

The IN pin is tied to 5V on 39 of 53 designs (a signal on 14). Counted from the KiCad layouts of 53 open source designs using the TLV75533PDBVR.

How is the TLV75533PDBVR EN pin connected?

The EN pin is tied to 5V on 36 of 53 designs (a signal on 17). Counted from the KiCad layouts of 53 open source designs using the TLV75533PDBVR.

What parts are used alongside the TLV75533PDBVR?

The USBLC6-2SC6, RP2040, ESP32-S3-WROOM-1, LM66100DCKR and STM32G0B1CBT6 appear in the most repositories here.

Which microcontrollers do boards using the TLV75533PDBVR use?

Most are built on STM32 (17), ESP32 (14), RP2040/RP2350 (10) and Renesas (1).

How big is a typical board using the TLV75533PDBVR?

The median is 76 × 60 mm, and 32% are two-layer designs.

What is the most popular open source board using the TLV75533PDBVR?

By GitHub stars, Silkscreen pcb by iandchasse, with 585 stars.

Can I simulate one of these boards using the TLV75533PDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part