HeatingTableControllerSTM32

GrandFatherPikhto·HeatingTableControllerSTM32

HeatingTableControllerSTM32 PCB layout, top view — open source STM32 board by GrandFatherPikhto

About the HeatingTableControllerSTM32 PCB

HeatingTableControllerSTM32 is an open source STM32 PCB design by GrandFatherPikhto, published on GitHub. It is a 2-layer board measuring 76.9 × 86.8 mm, with 93 components from 42 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the AMS1117-3.3 and 74HC14D. By type, the board carries 37 capacitors, 24 resistors, 10 connectors, 6 ICs, 6 transistors and 5 diodes.

It belongs with the sensors and power & battery designs in this gallery.

From the project

Hardware design (KiCad schematics and PCB layout) for a dual-channel controller designed for reflow ovens, hot plates, infrared/convection soldering stations, and PCB drying chambers.

Hardware design (KiCad schematics and PCB layout) for a dual-channel controller designed for reflow ovens, hot plates, infrared/convection soldering stations, and PCB drying chambers.

The controller is based on the STM32F103C8T6 microcontroller and supports two independent heating zones (e.g., top and bottom heaters) along with two K-type thermocouples via MAX6675 cold-junction compensated converters.

Main components on the HeatingTableControllerSTM32

HeatingTableControllerSTM32 bill of materials (BOM)

93 components, 42 distinct parts.

QtyPartRefs
3
AMS1117-3.3
U1, U2, U3
1
STM32F103C8Tx
U4
2
74HC14D
U5, U6
1
MMBT3904
Q1
5
BSS138
Q2, Q3, Q4, Q5, Q6
1
8MHz
Y1
1
32.768KHz
Y2
1
+5V In
J1
1
Boot
J2
1
USART
J3
1
LCD1602
J4
1
SWD
J5
1
Rotary Encoder
J6
1
MAX6675_01
J7
1
MAX6675_02
J8
1
Led Out
J9
1
Signal Out
J10
1
Buzzer
BZ1
1
MF-MSMF075-2
F1
1
SW_Push
SW1
Show 22 more
QtyPartRefs
1
LED Red
D1
3
LED Green
D2, D3, D4
1
1N4007
D5
3
C 10uF 35V
C1, C2, C3
1
47uF 10V
C4
1
10uF
C5
6
100nF
C6, C7, C8, C15, C16, C17
3
C 47uF 25V
C9, C10, C11
3
1uF
C12, C13, C14
2
12 pF
C18, C30
2
6.8 pF
C19, C31
7
1 uF
C20, C21, C22, C23, C24, C35, C36
6
100 nF
C25, C26, C27, C28, C29, C32
3
100 nF
C33, C34, C37
4
330R
R1, R11, R12, R13
3
220R
R2, R3, R4
10
4K7
R5, R6, R16, R17, R21, R22, R23, R24 +2
1
10K
R7
2
100K
R8, R9
1
1K
R10
2
10K
R14, R15
1
100R
R18

HeatingTableControllerSTM32 design files

The KiCad project lives in the GrandFatherPikhto/HeatingTableControllerSTM32 repository on GitHub; these links point at the commit this page was built from.

HeatingTableControllerSTM32: common questions

What microcontroller does the HeatingTableControllerSTM32 use?

The HeatingTableControllerSTM32 is built around the STM32F103C8Tx, from the STM32 family.

How big is the HeatingTableControllerSTM32 PCB?

The HeatingTableControllerSTM32 measures 76.9 × 86.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HeatingTableControllerSTM32?

93 components, from 42 distinct parts. The full bill of materials is listed on this page.

Where can I download the HeatingTableControllerSTM32 design files?

From the GrandFatherPikhto/HeatingTableControllerSTM32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the HeatingTableControllerSTM32 design in my own project?

The repository has no license, so all rights stay with GrandFatherPikhto. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HeatingTableControllerSTM32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards