5 open source boards using the 74HC14D
Real designs built with the 74HC14D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Mesp240 3Dpad
hwreverse
181.1 × 117.2 mm60 parts2LMIT13ESP32
Eveningstar hardware
ciaassured
81.2 × 71.6 mm120 parts2LAGPL-3.01AVR/Arduino
Kicad lin ctrl
s59mz
183 × 110 mm94 parts2LGPL-3.0174HController
Greentalinjo
150 × 60 mm137 parts6LNo license0STM32
GIMBAL
TIEN3915
84.4 × 80.2 mm137 parts2LNo license0
How designs wire the 74HC14D
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HC14D connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 nF).
- The 5A pin is left unconnected on 4 of 5 designs.
- The 6Y pin is left unconnected on 4 of 5 designs.
- The 1Y pin is left unconnected on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1Apin 1 | Connected to: Signal 60% · GND 40% |
|
| 1Ypin 2 | Connected to: Not connected 60% · a signal 40% | — |
| 2Apin 3 | Connected to: Signal 60% · not connected 20% · GND 20% |
|
| 3Apin 5 | Connected to: Signal 60% · not connected 20% · GND 20% |
|
| GNDpin 7 | Connected to: GND 100% | — |
| 4Apin 9 | Connected to: Signal 80% · not connected 20% |
|
| 5Ypin 10 | Connected to: Not connected 60% · a signal 40% | — |
| 5Apin 11 | Connected to: Not connected 80% · a signal 20% | — |
| 6Ypin 12 | Connected to: Not connected 80% · a signal 20% | — |
| 6Apin 13 | Connected to: Not connected 40% · GND 20% · a signal 40% |
|
| VCCpin 14 | Connected to: 3.3V 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mesp240 3Dpad by hwreverse, Eveningstar hardware by ciaassured, Kicad lin ctrl by s59mz and 74HController by Greentalinjo.
The 74HC14D in open source designs
The gallery holds 5 open source boards using the 74HC14D from 5 GitHub repositories; a typical one measures about 150 × 80.2 mm and carries around 120 components.
80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Mesp240 3Dpad by hwreverse.
Parts used alongside the 74HC14D
Microcontrollers on boards using the 74HC14D
What boards using the 74HC14D are built for
74HC14D: common questions
Where can I find a 74HC14D reference design?
Each of the 5 boards on this page is a real design using the 74HC14D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC14D VCC pin?
The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the 74HC14D.
How is the 74HC14D 5A pin connected?
The 5A pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HC14D.
How is the 74HC14D 6Y pin connected?
The 6Y pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HC14D.
Which microcontrollers do boards using the 74HC14D use?
Most are built on AVR/Arduino (1), ESP32 (1) and STM32 (1).
How big is a typical board using the 74HC14D?
The median is 150 × 80.2 mm, and 80% are two-layer designs.
What is the most popular open source board using the 74HC14D?
By GitHub stars, Mesp240 3Dpad by hwreverse, with 13 stars.
Can I simulate one of these boards using the 74HC14D before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.