Crocus
greatfet-hardware·crocus
About the Crocus PCB
Crocus is an open source PCB design by greatfet-hardware, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 70.7 × 53.3 mm, with 49 components from 18 distinct parts.
Other key parts include the nRF24L01+ and PCA9674. By type, the board carries 7 capacitors, 5 connectors, 5 resistors, 2 ICs, 1 crystal and 1 transformer.
It belongs with the rf & radio designs in this gallery.
From the project
a Nordic nRF24L01+ neighbor
https://github.com/greatscottgadgets/gsg-kicad-lib
If you are using git, the preferred way to install gsg-kicad-lib is to use the submodule:
Crocus is based on the Nordic RF nRF24L01+ and was inspired by The Next Hope Badge.
A notable capability of nRF24L01+ is 2 Mbps FSK. Many 2.4 GHz wireless transceiver ICs (including the CC2400 on Ubertooth One) only support FSK up to 1 Mbps. See Promiscuity is the nRF24L01+'s Duty for an excellent trick that can be done with Crocus.
Main components on the Crocus
Crocus bill of materials (BOM)
49 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | nRF24L01+ | QFN20-4 | U1 |
| 1 | PCA9674 | TSSOP16 | U2 |
| 1 | XTAL | HC-49S | Y1 |
| 1 | NEIGHBOR1 | HEADER-2x20 | J1 |
| 1 | NEIGHBOR2 | HEADER-2x20 | J2 |
| 1 | BONUS_ROW | HEADER-1x20 | J7 |
| 1 | RP-SMA | SMA-EDGE | P1 |
| 1 | EXPANSION | HEADER-2x6 | P2 |
| 4 | MOUNTING_HOLE | HOLE126MIL-COPPER | MH1, MH2, MH3, MH4 |
| 1 | BALUN | 2500BL14M100 | T1 |
| 24 | TEST | 0603-JUMPER | W1, W2, W3, W4, W5, W6, W7, W8 +16 |
| 2 | 33nF | 0603 | C1, C2 |
| 1 | 2.2nF | 0603 | C3 |
| 2 | 18pF | 0603 | C4, C5 |
| 1 | 10nF | 0603 | C6 |
| 1 | 1nF | 0603 | C7 |
| 1 | 22.0k | 0603 | R1 |
| 4 | 10k | 0603 | R2, R3, R4, R5 |
Crocus design files
The KiCad project lives in the greatfet-hardware/crocus repository on GitHub; these links point at the commit this page was built from.
- Layoutcrocus.kicad_pcb
Crocus: common questions
How big is the Crocus PCB?
The Crocus measures 70.7 × 53.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Crocus?
49 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Crocus design files?
From the greatfet-hardware/crocus repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Crocus design in my own project?
Yes, under the terms of its BSD-3-Clause license, which greatfet-hardware chose for the repository.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568