HardLabs

Mod cell 0 02 prima prova

Green-bms·SmartBMS·02_Cell Module/Hardware/Kikad_mod_cell_0_02/mod_cell_0_02_prima prova.kicad_pcb

Mod cell 0 02 prima prova PCB layout, top view — open source AVR/Arduino board by Green-bms

About the Mod cell 0 02 prima prova PCB

Mod cell 0 02 prima prova is an open source AVR/Arduino PCB design by Green-bms, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 62 × 42 mm, with 33 components from 18 distinct parts.

Its main chip is the ATtiny84A-SSU, from the AVR/Arduino family. Other key parts include the ADUM1250 and TMP36GT9Z. By type, the board carries 13 resistors, 4 ICs, 4 connectors, 4 diodes, 3 capacitors and 2 transistors.

It belongs with the power & battery designs in this gallery.

From the project

Open source Smart Battery Management System

Youtube presentation: https://youtu.be/0XNe25lMs6U?si=eK-90N3kao_sy4zy

Official page: https://hackaday.io/project/181453-green-bms

The main functions of BMS are: - To protect cells against overvoltage - To protect cells against undervoltage - To balance the cells

Smart BMS consists of four main components: 1. Cell Module (https://hackaday.io/project/181453-green-bms/log/198376-green-bms-cell-module) 2. Control Unit (https://hackaday.io/project/181453-green-bms/log/198414-green-bms-control-unit) 3. Limiter (https://hackaday.io/project/181453-green-bms/log/198378-green-bms-limiter) 4.…

Mod cell 0 02 prima prova, from the project README
From the project README

Main components on the Mod cell 0 02 prima prova

ADUM1250TMP36GT9ZATtiny84A-SSU

Mod cell 0 02 prima prova bill of materials (BOM)

33 components, 18 distinct parts.

QtyPartRefs
1
ADUM1250
IC1
2
TMP36GT9Z
U1, U2
1
ATtiny84A-SSU
U3
1
AO3400A
Q1
1
AO3401A
Q2
2
Conn_01x04
J1, J2
2
Conn_01x07
J4, J5
1
3A
F1
2
SW_Push
SW1, SW2
3
LED
D1, D2, D3
1
D_Sch.
D4
2
100n
C1, C3
1
100/16v
C2
2
4,7k
R1, R2
3
330
R3, R4, R7
2
220
R5, R8
2
10k
R6, R9
4
12
R10, R11, R12, R13

Mod cell 0 02 prima prova design files

The KiCad project lives in the Green-bms/SmartBMS repository on GitHub; these links point at the commit this page was built from.

Mod cell 0 02 prima prova: common questions

What microcontroller does the Mod cell 0 02 prima prova use?

The Mod cell 0 02 prima prova is built around the ATtiny84A-SSU, from the AVR/Arduino family.

How big is the Mod cell 0 02 prima prova PCB?

The Mod cell 0 02 prima prova measures 62 × 42 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mod cell 0 02 prima prova?

33 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mod cell 0 02 prima prova design files?

From the Green-bms/SmartBMS repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Mod cell 0 02 prima prova design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which Green-bms chose for the repository.

Can I test firmware for the Mod cell 0 02 prima prova without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in SmartBMS

Similar boards