9 open source boards using the TMP36GT9Z
Real designs built with the TMP36GT9Z, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Weather station
Invactive
90 × 32 mm59 parts2LNo license7AVR/Arduino
Mod cell 0 02
Green-bms
62 × 42 mm33 parts2LCC-BY-SA-4.0752AVR/Arduino
Mod cell 0 02
CHIBOY12
62 × 42 mm33 parts2LNo license0AVR/Arduino
Mod cell 0 02
chipsi
62 × 42 mm33 parts2LCC-BY-SA-4.00AVR/Arduino
Mod cell 0 02
wzc1992
62 × 42 mm33 parts2LCC-BY-SA-4.00AVR/Arduino
Mod cell 0 02 prima prova
Green-bms
62 × 42 mm33 parts2LCC-BY-SA-4.0752AVR/Arduino
Mod cell 0 02 prima prova
CHIBOY12
62 × 42 mm33 parts2LNo license0AVR/Arduino
Mod cell 0 02 prima prova
wzc1992
62 × 42 mm33 parts2LCC-BY-SA-4.00AVR/Arduino
Mod cell 0 02 prima prova
chipsi
62 × 42 mm33 parts2LCC-BY-SA-4.00
How designs wire the TMP36GT9Z
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TMP36GT9Z connects to, and the resistors, capacitors and other passives placed on it.
- The +VS pin is tied to VCC_TINY on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| +VSpin 1 | Connected to: VCC_TINY 100% | — |
| GNDpin 3 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mod cell 0 02 by Green-bms, Weather station by Invactive, Mod cell 0 02 by CHIBOY12 and Mod cell 0 02 by chipsi.
The TMP36GT9Z in open source designs
The gallery holds 9 open source boards using the TMP36GT9Z from 5 GitHub repositories; a typical one measures about 62 × 42 mm and carries around 33 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Mod cell 0 02 prima prova by Green-bms.
Parts used alongside the TMP36GT9Z
Microcontrollers on boards using the TMP36GT9Z
What boards using the TMP36GT9Z are built for
TMP36GT9Z: common questions
Where can I find a TMP36GT9Z reference design?
Each of the 9 boards on this page is a real design using the TMP36GT9Z. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TMP36GT9Z +VS pin connected?
The +VS pin is tied to VCC_TINY on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TMP36GT9Z.
Which microcontrollers do boards using the TMP36GT9Z use?
Most are built on AVR/Arduino (8) and STM32 (1).
How big is a typical board using the TMP36GT9Z?
The median is 62 × 42 mm, and 100% are two-layer designs.
What is the most popular open source board using the TMP36GT9Z?
By GitHub stars, Mod cell 0 02 prima prova by Green-bms, with 752 stars.
Can I simulate one of these boards using the TMP36GT9Z before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.